P500 Engine stalls at 14 MPH

[RumpRocket]

My engine is stalling at 14 mph when the drivers side seat belt is used..I haven't made any aleterations to the seat belt....I have to buckle and un-buckle the seat belt several times before it runs as should, than after a little while it'll act up again....any suggestions?

 

[NTCPrezJB]

My engine is stalling at 14 mph when the drivers side seat belt is used..I haven't made any aleterations to the seat belt....I have to buckle and un-buckle the seat belt several times before it runs as should, than after a little while it'll act up again....any suggestions?

Sounds like your Honda Lawyer's Safety switch is having issues. I'd try cleaning the electrical connection. Or you could do the bypass method if you wanted while you are looking at it.

 

[Neohio]

My engine is stalling at 14 mph when the drivers side seat belt is used..I haven't made any aleterations to the seat belt....I have to buckle and un-buckle the seat belt several times before it runs as should, than after a little while it'll act up again....any suggestions?

Does the seatbelt light on the dash go out when it is being used?

 

[RumpRocket]

Does the seatbelt light on the dash go out when it is being used?

It'll stay off until I move it around.....it acts like a bad connection.....I take JeremieBakers advice and try cleaning it...

 

[RumpRocket]

It appears that cleaning worked...thanks for the advice.

 

[tomcj2]

It appears that cleaning worked..

Exactly what did you clean? How did you clean it?

 

[RumpRocket]

I used some Electrical Contact Cleaner in Aerosol Can with a straw and sprayed it inside the Female end.....seems to have done the trick.

 

[NTCPrezJB]

I used some Electrical Contact Cleaner in Aerosol Can with a straw and sprayed it inside the Female end.....seems to have done the trick.

Excellent news sir!

 

[70Bones]

Mine did the same thing, it was frustrating. So I opened up the seat belt receiver and removed the tiny magnet, put it back together, no more issues, ever!

 

[Montecresto]

I used some Electrical Contact Cleaner

I had the same problem and the same remedy fixed it.