No, the lower arm adjusting nut kept coming loose this weekend. We would tighten the jam nut then it’s loose again. Finally realized it wasn’t coming loose, it was pulling the threads out of the arm. When the rear bolt on the lower arm let go, the arm folded down towards the ground. I used his winch and a couple clevises to winch it back up and hold it. This got him turned around and trying to get back up the hill it was just so rutted, off camber, and rocky that the tire kept digging farther and farther back. We tried adjusting the winch and couldn’t get it any better. It then sheared the upper balljoint off and completely wadded the front end up. Nothing we could do... I tried everything I could think of. Luckily my buddy joe who is a sxs mechanic for a living came back to the campsite and tore down my Honda and took my arms and axle down and put it on Tim’s his brake line got pinched when everything let go so he had no brakes, but we got it out of the nasty section of trail and back to the truck and trailer on the gravel.
Sent from my iPhone using Tapatalk