P700 Help, tire and rim width

[Ktthomas]

Stock front tires wore quick for me. I'm on the hunt for new tires all the way around and possibly wheels. My obstacle is that I want to go taller but I can't go any wider at all unless I buy a new trailer. See pic for definition of tight. lol. I hear a lot of the aftermarket wheels are wider. I have a few dings in my stock wheels. If nothing else I would be comfortable with a set of stock rims on the 700-4 deluxe. Mine is standard. Additionally I'd like them to be the same size all the way around. Is this doable or a pipe dream ?

 

[JimmyA]

I have the deluxe and run the same size tires all around 27/9/12! I don't see any reason why you couldn't use the same size all around.

 

[JTMako]

I have the deluxe and run the same size tires all around 27/9/12! I don't see any reason why you couldn't use the same size all around.

Jimmy, 2 questions:
1) do you have stock Deluxe rims?
2) do you rotate yours even though the front wheel is an inch narrower than rears?
Thanks!

 

[JimmyA]

Jimmy, 2 questions:
1) do you have stock Deluxe rims?
2) do you rotate yours even though the front wheel is an inch narrower than rears?
Thanks!

1; I do have the Deluxe wheels as in Avatar!
2:I can rotate but after around 2000, miles, not necessary!

 

[Backwoods]

you cannot rotate stock wheels two different offsets and different widths on wheels.

 

[JimmyA]

you cannot rotate stock wheels two different offsets and different widths on wheels.

Are the front and rear stock wheels different sizes? Didn't know! Deluxe wheels vs. steel wheels?

 

[Backwoods]

Are the front and rear stock wheels different sizes? Didn't know! Deluxe wheels vs. steel wheels?

Yes fronts are 6 wide rears are 7.5 and two different offsets that's why I went 5+2 ×7 wide all the way around plus it widened it .

 

[JimmyA]

Good to know, Thanks for the info

 

[Gary72]

Wanting to go to 15” rims with street tires any recommendations on rims and tires

 

[coolfads]

I have the deluxe and run the same size tires all around 27/9/12! I don't see any reason why you couldn't use the same size all around.

i see a set tires and wheels 27x9 and 27x11 for sell off a new 1000, will they fit the 700?

 

[casady]

i see a set tires and wheels 27x9 and 27x11 for sell off a new 1000, will they fit the 700?

Not without spacers/adapters for the hole/bolt pattern differences

 

[JimmyA]

you cannot rotate stock wheels two different offsets and different widths on wheels.

Well if needed rotating , I would have to rotate the tires alone which I can do myself, I have a harbor freight changer that I used during my M/C days.