Welcome to Honda Pioneer Tech
KIT#26
DIY KIT CONTAINS THE FOLLOWING:
SWITCHES QTY 4 TOTAL, ( SAME MAKE AS HONDA OEM ) NO PRINTING ON ACTUATOR
QTY 2 - 5 AMP, TO BE USED IN THE LIGHT BAR & AUX LIGHT SOCKET, SPST, ON/OFF
QTY 1 - 7.5 AMP FOR WINDSHIELD WIPER SOCKET, DPDT, ON/OFF
QTY 1 - 10AMP FOR HEATER SOCKET, DPDT, ON/OFF
CONNECTORS QTY 4 TOTAL
QTY 2 - 2 PIN CONNECTORS FOR LIGHT BAR & AUX LIGHT SOCKET
QTY 1 - 3 PIN CONNECTOR FOR 10A HEATER SOCKET
QTY 1 - 4 PIN CONNECTOR FOR 7.5A WINDSHIELD WIPER SOCKET
TERMINALS
QTY 12 - FEMALE SOCKET TERMINAL 20-14 AWG
KIT#26
DIY KIT CONTAINS THE FOLLOWING:
SWITCHES QTY 4 TOTAL, ( SAME MAKE AS HONDA OEM ) NO PRINTING ON ACTUATOR
QTY 2 - 5 AMP, TO BE USED IN THE LIGHT BAR & AUX LIGHT SOCKET, SPST, ON/OFF
QTY 1 - 7.5 AMP FOR WINDSHIELD WIPER SOCKET, DPDT, ON/OFF
QTY 1 - 10AMP FOR HEATER SOCKET, DPDT, ON/OFF
CONNECTORS QTY 4 TOTAL
QTY 2 - 2 PIN CONNECTORS FOR LIGHT BAR & AUX LIGHT SOCKET
QTY 1 - 3 PIN CONNECTOR FOR 10A HEATER SOCKET
QTY 1 - 4 PIN CONNECTOR FOR 7.5A WINDSHIELD WIPER SOCKET
TERMINALS
QTY 12 - FEMALE SOCKET TERMINAL 20-14 AWG
- Requirements: Honda Signature Accessory SWITCH PLATE/VOLT METER/WIRE HARNESS must be installed in SXS before proceeding.
- You will need access to a Molex style crimper to assemble your wiring harness
Last edited:
