Has anyone attempted to put a P500 in the back of a Honda Ridgeline with the tail gate down? My tape measure says it will fit with 1/4" on each side to spare. I think I will have to climb out the windshield once loaded if it will fit.
I have hauled full sized street bikes in the bed. the tailgate swings open like a door and also down like a regular tailgate. Because of this it only has a support cable on the left side. It is larger than a regular cable and I place a chain on the right side to hold the weight. The P500 wheelbase is approx. 1 foot longer than my truck bed with the gate down. I was going to put 3/4 in plywood down to extend it out. That should help take some load off the gate also. I would back the buggy in to get the motor weight towards the front.Do you have extra support for tail gate?