C
Hey everyone, I have a problem. I have a p 700 with 400 miles on it. After sinking it last weekend, it wont move when I put it in gear. I have changed the oil 5 times and it was looking good using cheap 10w 30 oil. So I ran it down to my buddy house and ran it back. It was bogging down at 30mph. I'm sure I put to much oil in it at that point. When I got home, took off the exhaust, cleaned it really well. I changed the oil again (3qts), new oil filter, new air filter. Started it up, sounds like it's switching into gear but wont move when giving throttle. I checked solenoid A and B, A was clogged with dirt. I flushed A and B. I haven't checked the linear solenoid but I will today. Any ideas?? Hopefully I didn't burn my clutch up.