P1000m5 Pioneer 1000-5 on a 12 foot Jumping Jack Tent Trailer

[JAL]

Yup. Pioneer 1000-5 spotted, in the wild, on top of a 12 foot Jumping Jack Tent Trailer.

 

[Admin]

 

[Smitty335]

Yup. Pioneer 1000-5 spotted, in the wild, on top of a 12 foot Jumping Jack Tent Trailer.


View attachment 237170

Have fun!

 

[Adam490]

Yup. Pioneer 1000-5 spotted, in the wild, on top of a 12 foot Jumping Jack Tent Trailer.


View attachment 237170

Are your rotopax hanging from the center ROPS bar?

 

[JAL]

Hi Tim... You are correct. At first, I mounted the two Rotopax containers to the center roll bar. This interfered with my view through my rear view mirror. Also, I was not so happy with the possibility of fuel dripping down between the seat and cargo bed. I found a PAX bar mount that I modified and I moved the Rotopax gas container to the rear onto the swing out spare tire structure. I left the water container in the cab.

If you look closely on the right of this photo, I added a clamp on mount for a Chameleon 2M Ham Radio antenna which is on order. These antennas were designed for RVs and do not require a metal ground plane.

 

[Dirtstiffs-1000]

Hi Tim... You are correct. At first, I mounted the two Rotopax containers to the center roll bar. This interfered with my view through my rear view mirror. Also, I was not so happy with the possibility of fuel dripping down between the seat and cargo bed. I found a PAX bar mount that I modified and I moved the Rotopax gas container to the rear onto the swing out spare tire structure. I left the water container in the cab.

If you look closely on the right of this photo, I added a clamp on mount for a Chameleon 2M Ham Radio antenna which is on order. These antennas were designed for RVs and do not require a metal ground plane.

View attachment 237184

You in Oregonifornia? I see the ATV sticker.
I'm on the wet side.
Nice rack, looks familiar.