P700 Sunday Project

[CGD]

My son and I completed a few mods to our 2020 Pioneer 700-2 today. I bought wheel adapters/ spacers to install the factory wheels and tires off of my 2020 P1K5 Deluxe. They are made by RB3 and are 1.5" spacers.
We also installed some home brew shock spacers on the front shocks that are 1-1/8" tall. The last thing we installed were some kemi moto side view mirrors. We gained about 2" of ground clearance and used some wheels and tires that were just collecting dust.

 

[livefromthetree]

Looking good!

 

[Remington]

Looks nice! Quite a change.

 

[CGD]

Thanks. My son loves it and he drives the 700 almost exclusively. He's been using it to run to the store for us, make trash runs to the dumpster, and explore and drive to all of his favorite fishing holes.
Next mods are a diy skid plate so he can get in the trails , harnesses, and probably a 2 or 3 inch cage chop but I'm in the midst of chopping the P1K5 cage so it will be late Summer or early Fall when the 700 goes under the knife.