Talon flipup tablet mount

[Trey - 3DSXSDesign]

Tramguage1 & Vondy thanks for sharing my products and the kind words!! I just joined this forum and am looking forward to chatting with people. If anyone has any questions about any of my products I am happy to answer questions.​

 

[Admin]

 

[Trey - 3DSXSDesign]

Looks nice! Where did you get the auxbeam mount?

You can message me if you want more info on that!

 

[Tramguage1]

Tramguage1 & Vondy thanks for sharing my products and the kind words!! I just joined this forum and am looking forward to chatting with people. If anyone has any questions about any of my products I am happy to answer questions.​

Welcome Trey! I lam enjoying my tablet mount very much. I hope all the members here will check out your products.

 

[Trey - 3DSXSDesign]

Any chance you could post a link to Trey Brock?

I just joined this forum, so reach out to me if you have any questions.

 

[Trey - 3DSXSDesign]

Looks nice! Where did you get the auxbeam mount?

If you want more details about the auxbeam mount, let me know!

 

[Udaman]

You can message me if you want more info on that!

I found you on FB thanks to Vondy's link. Parts ordered. Thanks!

 

[Trey - 3DSXSDesign]

Any chance you could post a link to Trey Brock?

I am on here now , I think you can message me or just call me 601-383-2712

 

[Nevada Notch]

Trey,

I was looking at the cutouts on the inside of the mount. Are these cutout openings the same size as the standard rocker switches? Once the cutout is removed, will a rocker switch snap into the opening?

Rand

 

[Trey - 3DSXSDesign]

Trey,

I was looking at the cutouts on the inside of the mount. Are these cutout openings the same size as the standard rocker switches? Once the cutout is removed, will a rocker switch snap into the opening?

Rand

Yes , but what you are looking at the a 2023 and it comes with that plate for rockers switches , but i do make a rocker switch plate and a box to make a 2nd cubby hole in clusters old location in the middle

 

[O2bsmitty]

3x USB and 2x voltmeter in the cubby, too. Auxbeam accessible just by flipping open the front panel GPS door. Clean as OEM.

View attachment 422536
View attachment 422537
View attachment 422538
View attachment 422539

Really like this set up.

3x USB and 2x voltmeter in the cubby, too. Auxbeam accessible just by flipping open the front panel GPS door. Clean as OEM.

View attachment 422536
View attachment 422537
View attachment 422538
View attachment 422539

really like this set up. Whose design is this? Or did I miss that?

 

[Scoop]

Really like this set up.

really like this set up. Whose design is this? Or did I miss that?

This is the one I bought:

Amazon.com

 

[Jankyeye]

This is the one I bought:

Amazon.com

If it works with a SATV flip up windshield, I’m sold.

 

[O2bsmitty]

If it works with a SATV flip up windshield, I’m sold.

What do you see that would make you think it wouldn’t?

 

[Jankyeye]

What do you see that would make you think it wouldn’t?

The way the lower half folds in for the latch. Picture is of a pioneer but the lip is similar. Guess I just don’t grasp how tall the tablet holder is above the dash

 

[O2bsmitty]

The way the lower half folds in for the latch. Picture is of a pioneer but the lip is similar. Guess I just don’t grasp how tall the tablet holder is above the dash

View attachment 429416

No I see it now. Might be hard to operate the handle and if you have the extended handle might not clear. We have a pioneer but are looking to buy a talon. Might be a reason to buy the electric powered tilt windshield. lol.

 

[Scoop]

If it works with a SATV flip up windshield, I’m sold.

How tall is the lower half of the flip up windshield on the Talon? In my pic, that's the SATV full glass for reference.

 

[Nevada Notch]

That would all depend of what sized tablet you are going to use. The top part of the mount slides up and down to secure the tablet and will hold tablets up to inches in size

The bigger the tablet the more likely there could be a possibility of interference with the folding latch mechanism. Check out the following review on Amazon.....

This thing doesn't fit properly. It does not line up with the two upper screws on the talon. Not even enough material to enlarge the hole to make it fit. I had to cut the back of it completely out. It's only going to be held on with the six M4-16 self tappers that I'm sure will woller out before long and I'll have to make brackets to hold it on. ALSO, IF YOU HAVE THE SUPER ATV FLIP OUT WINDSHIELD IT WILL INTERFERE WITH IT AND YOU WILL HAVE TO MAKE A BRACKET THAT HOLDS THE TOP OF THE PAD ON. DID I MENTION YOU WILL HAVE TO TAKE THE WINDSHIELD COMPLETELY OFF. I OWN A MACHINE SHOP SO I WAS ABLE TO MAKE A BRACKET. WHAT A JOKE IT WAS INSTALLING IT. OVERALL RATING IS ZERO!

Rand

 

[Scoop]

That would all depend of what sized tablet you are going to use. The top part of the mount slides up and down to secure the tablet and will hold tablets up to inches in size

The bigger the tablet the more likely there could be a possibility of interference with the folding latch mechanism. Check out the following review on Amazon.....

This thing doesn't fit properly. It does not line up with the two upper screws on the talon. Not even enough material to enlarge the hole to make it fit. I had to cut the back of it completely out. It's only going to be held on with the six M4-16 self tappers that I'm sure will woller out before long and I'll have to make brackets to hold it on. ALSO, IF YOU HAVE THE SUPER ATV FLIP OUT WINDSHIELD IT WILL INTERFERE WITH IT AND YOU WILL HAVE TO MAKE A BRACKET THAT HOLDS THE TOP OF THE PAD ON. DID I MENTION YOU WILL HAVE TO TAKE THE WINDSHIELD COMPLETELY OFF. I OWN A MACHINE SHOP SO I WAS ABLE TO MAKE A BRACKET. WHAT A JOKE IT WAS INSTALLING IT. OVERALL RATING IS ZERO!

Rand

While I don't have a flip up windshield in the Talon, installing the holder was a breeze. In fact, the two OEM screws at the top are providing all the support. I didn't even use the self-tapping screws, as I didn't want to make six new holes until I found out it worked. I used double-sided foam Gorilla tape along the two edges - and it's still there working great. Not sure why that reviewer had such a difficult time installing it.

 

[O2bsmitty]

How tall is the lower half of the flip up windshield on the Talon? In my pic, that's the SATV full glass for reference.

That would all depend of what sized tablet you are going to use. The top part of the mount slides up and down to secure the tablet and will hold tablets up to inches in size

The bigger the tablet the more likely there could be a possibility of interference with the folding latch mechanism. Check out the following review on Amazon.....

This thing doesn't fit properly. It does not line up with the two upper screws on the talon. Not even enough material to enlarge the hole to make it fit. I had to cut the back of it completely out. It's only going to be held on with the six M4-16 self tappers that I'm sure will woller out before long and I'll have to make brackets to hold it on. ALSO, IF YOU HAVE THE SUPER ATV FLIP OUT WINDSHIELD IT WILL INTERFERE WITH IT AND YOU WILL HAVE TO MAKE A BRACKET THAT HOLDS THE TOP OF THE PAD ON. DID I MENTION YOU WILL HAVE TO TAKE THE WINDSHIELD COMPLETELY OFF. I OWN A MACHINE SHOP SO I WAS ABLE TO MAKE A BRACKET. WHAT A JOKE IT WAS INSTALLING IT. OVERALL RATING IS ZERO!

Rand

Well then. That eliminates this one. lol. Liked the looks in the picture. I guess I will keep looking.

 

[O2bsmitty]

While I don't have a flip up windshield in the Talon, installing the holder was a breeze. In fact, the two OEM screws at the top are providing all the support. I didn't even use the self-tapping screws, as I didn't want to make six new holes until I found out it worked. I used double-sided foam Gorilla tape along the two edges - and it's still there working great. Not sure why that reviewer had such a difficult time installing it.

So it does line up? I liked that one because it flips down instead of up and it looks like it belongs there.