P1000 Talon Seat Conversion

[TylerDfab]

There has been a few threads about bucket seat conversions for the P1k and I figured id show what ive been working on. I was able to install the factory talon seats with no modifications to the machine and retaining factory seat belts. Rider position is very close to the factory height.

Bolt in bench to bucket seat conversion for the Pioneer 1000 Available for preorder from

https://www.feveroffroad.com/

Currently working with seat manufacturers to have a cheaper option in black.

 

[Admin]

 

[Kilo427]

I like it I do agree it would be nice if it came in black

 

[TylerDfab]

I like it I do agree it would be nice if it came in black

Right, and they do get a pretty penny for their seat. But it is understandable for the quality you get.

 

[BWAF]

There has been a few threads about bucket seat conversions for the P1k and I figured id show what ive been working on. I was able to install the factory talon seats with no modifications to the machine and retaining factory seat belts. Rider position is very close to the factory height.

View attachment 136396

Bolt in bench to bucket seat conversion for the Pioneer 1000 Available for preorder from

https://www.feveroffroad.com/

Currently working with seat manufacturers to have a cheaper option in black.

View attachment 136393
View attachment 136395
View attachment 136394
View attachment 136397

Sweet

Sent from my SM-G930U using Tapatalk

 

[trigger]

they do get a pretty penny for their seat.

How much?

 

[Remington]

How much?

Click on the link and stroke out!

 

[BigOL3]

Click on the link and stroke out!

On top of that, I suspect it allow more of that HEAT to rise up!.

 

[TylerDfab]

On top of that, I suspect it allow more of that HEAT to rise up!.

The seats are most of the hard cost of the kit

I dont believe it will be hotter, as it retains the factory rubber parts and covers them with metal!

 

[Redmoon]

The seats are most of the hard cost of the kit

I dont believe it will be hotter, as it retains the factory rubber parts and covers them with metal!

Or you could look at that you are getting a free cooking griddle with each purchase. Eggs and sausage anyone?

 

[ohanacreek]

The seats are most of the hard cost of the kit

I dont believe it will be hotter, as it retains the factory rubber parts and covers them with metal!

Sell the seat pan and you’ll have a LOT of guys doing RZR seat conversions.

 

[TylerDfab]

Or you could look at that you are getting a free cooking griddle with each purchase. Eggs and sausage anyone?

Now we're getting somewhere!

 

[TylerDfab]

Sell the seat pan and you’ll have a LOT of guys doing RZR seat conversions.

May possibly do a DIY kit...

 

[Redmoon]

Now we're getting somewhere!

Don't get me wrong I almost bought a General because I wanted the bucket seats. It just concerns me that all of the new exposed metal flat plate laid on top of Hondas rubber condom heat answer is going to act like a big heat transfer plate. At least the factory bench seat is full of foam across the entire cabin width which helps mitigate the engine heat some. I still added a high temp heat blanket under the seat and it made a huge difference. That could also be done with your seat mod and Honda should be doing it from the factory, IMO.

 

[Kilo427]

Sell the seat pan and you’ll have a LOT of guys doing RZR seat conversions.

I agree thats a good idea.

 

[Y2alstott]

Is this still a thing or was it abandoned? Or is someone else doing a kit?

 

[rickoshea]

No idea but I got talon seats I would sell since I got another machine.

i've been watching facebook marketplace and c/l for a set of talon seats to replace my rzr seats in my mod.no luck so far.shipping will be a huge problem or i'd grab them right now.

 

[Dave GT]

There has been a few threads about bucket seat conversions for the P1k and I figured id show what ive been working on. I was able to install the factory talon seats with no modifications to the machine and retaining factory seat belts. Rider position is very close to the factory height.


Bolt in bench to bucket seat conversion for the Pioneer 1000 Available for preorder from

Fever Off Road

Currently working with seat manufacturers to have a cheaper option in black.

FYI This is vaporware. Company decided not to produce these. Disappointed.

 

[tdhanses]

FYI This is vaporware. Company decided not to produce these. Disappointed.

Yeah they should of just made the mounts and let the customer buy seats.

 

[Brap-tor]

There has been a few threads about bucket seat conversions for the P1k and I figured id show what ive been working on. I was able to install the factory talon seats with no modifications to the machine and retaining factory seat belts. Rider position is very close to the factory height.

View attachment 136396

Bolt in bench to bucket seat conversion for the Pioneer 1000 Available for preorder from

https://www.feveroffroad.com/

Currently working with seat manufacturers to have a cheaper option in black.

View attachment 136393
View attachment 136395
View attachment 136394
View attachment 136397

I cannot get your website to work, any help would be great thanks.

 

[Dave GT]

I cannot get your website to work, any help would be great thanks.

He never made these and appears went out of business. I was able to fab my own of sorts using talon seats.