UTV lift?

[Hoosier1960]

Has anyone built or bought a lift to work on their SxS? I can no longer get on the ground or use a creeper. I would like to be able to do more work myself on my P500. I would need to get it high enough to sit on a rolling stool or chair and roll underneath it.


Sent from my iPhone using Tapatalk

 

[KPM]

I use composite ramps. Then if needed jack up the back and put jack stands.


Sent from my iPhone using Tapatalk

 

[Hoosier1960]

I use composite ramps. Then if needed jack up the back and put jack stands.


Sent from my iPhone using Tapatalk

Thank you for the reply. I really need to get it higher.


Sent from my iPhone using Tapatalk

 

[HiFive]

You can use ramps to lift for better access.

 

[ToddACimer]

Snap-on Wheeltronics 6k mid rise hoist
Works great for vehicles and side by sides. Also easy to transport

 

[Ridinfool]

Snap-on Wheeltronics 6k mid rise hoist
Works great for vehicles and side by sides. Also easy to transport

View attachment 422533 View attachment 422534

Thanks for posting this, I’ve been looking for one like this since I seen it in your build thread, just to lazy to go back and look it up…

 

[ToddACimer]

Thanks for posting this, I’ve been looking for one like this since I seen it in your build thread, just to lazy to go back and look it up…

It's awesome for the pioneer but I use it a lot. Cars, trucks, mowers, trailers, atvs, welding projects. I used to use it all the time for loading my truck until I poured a loading dock

 

[SILVER_ALERT]

Has anyone built or bought a lift to work on their SxS? I can no longer get on the ground or use a creeper. I would like to be able to do more work myself on my P500. I would need to get it high enough to sit on a rolling stool or chair and roll underneath it.


Sent from my iPhone using Tapatalk

I have not bought a lift, but I have done a lot of business with these folks, over the years. I noticed that they have quite a few lifts and drive on ramps for atvs and utvs.
BTW, if you sign up for their mailing list, they will usually send you a discount coupon for 10 or 15% off your 1st order.
These are just a few examples, but they have quite a few more.

Black Widow Aluminum ATV and Lawn Tractor Stand - 1,800 lb. Capacity

The ATV/Lawn Tractor Maintenance Stand features non-marring clear vinyl pads to reduce ramp movement during loading, as well as a high wheel stop to help prevent ATVs or Lawn Tractors from driving too far.

www.discountramps.com

Black Widow Hydraulic Motorcycle & ATV Jack - 1,500 lbs. Capacity

Heavy duty Black Widow motorcycle jacks at super low discount prices. 1500 lb capacity and lifting height of 16 inches.

www.discountramps.com

Black Widow Air-over-Hydraulic Motorcycle/ATV Lift Table - 1,500 lb. Capacity

The Black Widow Extra-Wide Air & Hydraulic Motorcycle/ATV Lift Table will save you time and money by safely raising your bikes and four-wheelers for routine maintenance, service check-ups, and oil changes.

www.discountramps.com

Black Widow Air/Hydraulic UTV Lift Tables - 2,500 lb. Capacity - 60

2,500 lb. capacity UTV lift table kits give you everything you need to perform maintenance on your ATV, UTV, or motorcycle from your own garage.

www.discountramps.com

 

[Dirtstiffs-1000]

The Black Widow air/hydraulic is pretty good for the money. I bought one for working on motorcycles.

**make sure the safety locks are in place with a load in the air.

Think mine was also made in the USA at that time.
A garage pedestal style lift would get you under as you described. My next target..

 

[Hoosier1960]

A garage pedestal style lift would get you under as you described. My next target..[/QUOTE]

I was thinking possibly a two post lift. I have 14’ tall ceilings


Sent from my iPhone using Tapatalk

 

[Vikes79]

This is what I have and it’s worth every penny. Down side is it’s 110 v 30amp and I had to make dedicated circuit for it. I pull a long oversized cord on it and can move it around my 40x30 shop. I find it works best on the p1k5 sideways vs long ways .

6,000 Lbs MID RISE 48" High Vehicle Scissor Lift MECHANIC LIFT HOIST | eBay

Free 3 TON (6600 Lbs.). Lifting weight capacity: 6,000 lbs. Must be equipped with a loading dock (48”- 52”) or a forklift to quickly and safely unload freight. Limited Access Locations. Farms or Ranches.

www.ebay.com

I’m taking the tires of my 150 so I can make it lower to the ground so I can change out the lifters/rockers much easier by lowering and raising as needed.

 

[Vikes79]

A garage pedestal style lift would get you under as you described. My next target..

I was thinking possibly a two post lift. I have 14’ tall ceilings


Sent from my iPhone using Tapatalk
[/QUOTE]
You need a thick slab for those. If you only have a 4” floor you’ll need to cut out a thicker slab.

 

[SuperATV]

We have about 30 of these, and they work great. They are headquartered right next door to us where they make the Rotary brand 2 and 4 post lifts.

6000MRL

6000MRL Mid-Rise Lift Features: The mid-rise 6,000 lbs. capacity lift is an excellent choice for low ceilings or adding a bay for seasonal increases in business. The 6000MRL provides good working height for tires, brakes and body repairs. Additional Features: Portable, easy to move Two...

www.forwardlift.com

 

[Vondy]

I picked up a Presto lift recently off marketplace. Meant for industrial use but works great and price was right. Looks like these sell new for 5-10k. Picked it up for $600. It is very heavy with 2500lb capacity. Uses air bags to lift so no hydraulic pump to worry about and hooks right to air compressor.
Mid rise lift would be better but price was right on this one so i couldn’t pass up. My back appreciates it!