P1000m5 What did you add to/do with your Pioneer 1000 5 today?

[Rottiedog]

View attachment 184343
Removed sway bar


Sent from my iPhone using Tapatalk

Why did you eliminate it? Thanks

 

[Rottiedog]

H

Finally got around to adding my inspection port for my sub trans.no more removing the seat to check the oil.

View attachment 203420 View attachment 203421 View attachment 203422 View attachment 203423

e, is it possible to send me some details about your fix/install? Thanks

 

[JoeyL]

Why did you eliminate it? Thanks

It allows the rear suspension articulate independently (climb stuff better). It does add a lot of body roll, so don't do it if you drive fast.

 

[rickoshea]

H

e, is it possible to send me some details about your fix/install? Thanks

which part? the inspection port or the complete seat mod?

 

[Rottiedog]

which part? the inspection port or the complete seat mod?

Thanks. I’d like to know more about the seat mod. I have found out about the inspection port.

 

[rickoshea]

Thanks. I’d like to know more about the seat mod. I have found out about the inspection port.

all the details are in this thread.you have to go back to around Feb/March.pg.12

 

[rickoshea]

new front brake pads today then the tracks are going on.and a quick powerwash before the temps drop below freezing.probably the last wash before the spring thaw.need to blow out the garden hoses and shut off the hose bibs before the winter sets in hard.

 

[mj1angier]

need to blow out the garden hoses and shut off the hose bibs before the winter sets in hard.

LOL, you are dealing with freeze prep and we still having hurricanes and mosquitoes in NC

 

[rickoshea]

LOL, you are dealing with freeze prep and we still having hurricanes and mosquitoes in NC

it's already snowed 3 times. 🤣 .early winter is inevitable where i am.i can b!tch and moan about it or i can accept it and make the best of it.winter can be really fun here if i do it right.having all the winter toys helps.

 

[Vikes79]

Finally got my big light bar with 4 separate 4” cube lights.

made the front cubes so that they can pivot pointed forward and almost to the rear.

I mounted the rear cubes in the rear seat belt bracket mount as I have 5 point harnesses.

I’m going to add two more to face rearward but I have to order them yet.

I was going to convert the headlights to led, but I can’t get the Auxbeam lights I bought to function between high or low, so I had to take them out.

still got to tidy the wires yet, and finish the new switch panel yet.

Before

After

 

[Robobrainiac]

Finally got my big light bar with 4 separate 4” cube lights.

made the front cubes so that they can pivot pointed forward and almost to the rear.

I mounted the rear cubes in the rear seat belt bracket mount as I have 5 point harnesses.

I’m going to add two more to face rearward but I have to order them yet.

I was going to convert the headlights to led, but I can’t get the Auxbeam lights I bought to function between high or low, so I had to take them out.

still got to tidy the wires yet, and finish the new switch panel yet.

Before

View attachment 232672
After
View attachment 232673View attachment 232678View attachment 232674View attachment 232675View attachment 232676View attachment 232677

What mount did you use for the fire extinguisher?

 

[Vikes79]

What mount did you use for the fire extinguisher?

Ive had it for awhile...I really can’t remember the brand but I believe it’s similar to this one.

VXAR Fire Extinguisher Holder Canvas Adjustable Roll Bar Mounted for Auto Car UTV(Black) - - Amazon.com

VXAR Fire Extinguisher Holder Canvas Adjustable Roll Bar Mounted for Auto Car UTV(Black) - - Amazon.com

www.amazon.com

I usually move it around depending on what I’m doing, that’s why I like it.

 

[Dirtstiffs-1000]

I finally did this. Got tired of it being in the way and sliding around with the fabric velcro mount I had.
Also stays much cleaner and super quick and easy to access.

 

[rickoshea]

added a new set of loading ramps for my trailer.the old aluminum 1600# ones are not strong enough so i went with 2000# steel.

 

[Vikes79]

Installed shifter cover from @Montana and new pbr switch panel for the extra lights.

 

[Dirtstiffs-1000]

Tailgate stiffener-
I thought I'd try Jason's tail gate fix. Nice guy, great quality.
More to come when I mount it the next day or two.
If I'm in trouble for supporting another good guy's home business, apologize now.

 

[Dirtstiffs-1000]

Tailgate stiffener.

Simple to install.
High quality, light weight metal sheared for a perfect fit and is texture coated to match the bed.

Now I have both a level tailgate and one that is sturdy enough to sit on. I'd recommend.

 

[annoyed]

Added the factory hard roof, removed all the switches, wires, and lights the previous owner installed. Found enough extra wire under the hood that I could wrap it around the buggy a few times and still have leftovers.

next weekend I’ll figure out a mount for my 30”curved light bar, and run new wire (to proper length).

 

[grabbe123]

Endless accessories to add. About to do the rear bumper and fender flares. I went with 29x11-14 all the way around, no alterations, and it throws mud all inside the buggy. I just put a 6500 lb viper elite winch on the front. I'll try to take some pictures of everything else I've done from the rocker panel to the 46" soundbar.

 

[JenElio]

Added some whips thanks to @Adam490