P1000m3 Wheel and tire setup

Dirtstiffs-1000

Dirtstiffs-1000

Well-Known Member
Lifetime Member
Supporting Member
Nov 3, 2018
1,657
6,034
113
Republican from the wet side of Oregonifornia
hondasxs.com
Ownership

  1. 1000-5
That’s essentially what I’m doing, what backspacing did you go with?
1" RB3. Haven't got them yet to comment.
I also had a square tire or two but more riding takes that out. I also adjusted pressure and torqued beadlock. Pretty satisfied, although they run shorter height than spec'd out.
 
Dirtstiffs-1000

Dirtstiffs-1000

Well-Known Member
Lifetime Member
Supporting Member
Nov 3, 2018
1,657
6,034
113
Republican from the wet side of Oregonifornia
hondasxs.com
Ownership

  1. 1000-5
1" RB3. Haven't got them yet to comment.
I also had a square tire or two but more riding takes that out. I also adjusted pressure and torqued beadlock. Pretty satisfied, although they run shorter height than spec'd out.
Haven't had them out to really test, yet.
 
Wisco pioneer

Wisco pioneer

Active Member
Apr 1, 2022
41
203
33
Wisconsin
Ownership

  1. 1000-3
Is there anything specific I need to do if I go from 12 inch to 14 inch tires? Bought a set of new take- offs for my 1000-3 and mine has 12's and the new ones are 14's.
 
Bighat

Bighat

Well-Known Member
Nov 25, 2021
887
3,795
93
Gallipolis Ohio
Ownership

  1. 1000-3
I like the 12" wheels. In fact, that's one reason I bought the base model. Not enough difference between the base and the deluxe, just stuff you don't real need. More tire gives you more cushion for the pushin. The big time off roaders always have a lot of sidewall on they're tires. More tire sidewall equals better ride on rought terrain. Tall tires rob power. I had plenty of 4x4's with larger tires. You always lose power unless you start changing many other things. Not to mention wear on transmission and clutches.
 
  • Like
Reactions: Marc1991
Dirtstiffs-1000

Dirtstiffs-1000

Well-Known Member
Lifetime Member
Supporting Member
Nov 3, 2018
1,657
6,034
113
Republican from the wet side of Oregonifornia
hondasxs.com
Ownership

  1. 1000-5
Is there anything specific I need to do if I go from 12 inch to 14 inch tires? Bought a set of new take- offs for my 1000-3 and mine has 12's and the new ones are 14's.
If they're Honda Pioneer take offs, they should bolt right up.
27x11x14 rear, 27x9x14 front
 
Marc1991

Marc1991

Active Member
Nov 30, 2020
56
194
33
New york
Ownership

  1. 1000-3
I like the 12" wheels. In fact, that's one reason I bought the base model. Not enough difference between the base and the deluxe, just stuff you don't real need. More tire gives you more cushion for the pushin. The big time off roaders always have a lot of sidewall on they're tires. More tire sidewall equals better ride on rought terrain. Tall tires rob power. I had plenty of 4x4's with larger tires. You always lose power unless you start changing many other things. Not to mention wear on transmission and clutches.
Exactly, I stayed with 12inch. 27x9x12 all the way around with a spare.
 
  • Like
Reactions: ChadD

About us

  • Our community has been around for many years and pride ourselves on offering unbiased, critical discussion among people of all different backgrounds. We are working every day to make sure our community is one of the best.

User Menu

Buy us a beer!

  • Lots of time and money has gone into making sure the community is running the best software, best designs, and all the other bells and whistles. Care to buy us a beer? We'd really appreciate it!

    Beer Fund!

    Club Membership!