29" Bighorns?

[nbomar]

I can get a set of Rzr 1000 take offs for $180. I'm very tempted to give these a run. Does anyone see a reason this isn't a good idea? Heck I could even get another set of wheels just so I have 2 sets.

 

[Admin]

 

[Hondasxs]

Nope... Sounds like a plan to me. As long as the tread is good.
I hear 29's fit fine. 30's rub. I havent measured. But sounds like you should be good.
And if not. $180 resale should be easy.

 

[Tot]

this is kinda how 29s would look. I say go for it!

 

[HivoltageHonda]

I've been wanting 29" bighorns on mine also. I wish I could run up on a deal like that.

 

[jocelyn]

Nice machine tot I look for buy the same machime same color here in quebec trail law width is 64 max how is your mesurement now whit this tires wheels combo front and rear tank you

 

[Tot]

Nice machine tot I look for buy the same machime same color here in quebec trail law width is 64 max how is your mesurement now whit this tires wheels combo front and rear tank you

That's actually not my machine but I wish it was. It was one I saw online at a dealer around me. I can't tell you much about the actual width because I don't know what the offset of the wheels are

 

[Hometeam]

Those wheels look like the STI HD6 wheels.... I would imagine they are with a 5+2 offset. But hard to tell from the picture.

 

[HivoltageHonda]

I can get a set of Rzr 1000 take offs for $180. I'm very tempted to give these a run. Does anyone see a reason this isn't a good idea? Heck I could even get another set of wheels just so I have 2 sets.

Nbomar
Can you get anymore 29" bighorn take offs?

 

[nbomar]

I didn't get them. The guy backed out. I would suggest keeping an eye on Rzrforums classifieds.

 

[DMZ]

Hello All:

I have a Pioneer 1000 EPS 3 Seater all stock and am wanting 29 inch tires which Maxxis Bighorns 29-9-14 or 29-11R-14 will fit on stock rims and no rubbing. Any help appreciated.

 

[joeymt33]

Hello All:

I have a Pioneer 1000 EPS 3 Seater all stock and am wanting 29 inch tires which Maxxis Bighorns 29-9-14 or 29-11R-14 will fit on stock rims and no rubbing. Any help appreciated.

I am pretty sure that you will need a 2 inch bracket lift to be able to run those tires.

Hopefully someone will come along with some experience with those tires.

 

[Carleton]

Hello All:

I have a Pioneer 1000 EPS 3 Seater all stock and am wanting 29 inch tires which Maxxis Bighorns 29-9-14 or 29-11R-14 will fit on stock rims and no rubbing. Any help appreciated.

I'm wondering the same thing. Has anyone tried to run bighorn 2.0's in 29" without lift? I'm considering running these tires with either wheel spacers on the stock rims, or with a rim that has a bit more offset..

Any help appreciated

 

[joeymt33]

I'm wondering the same thing. Has anyone tried to run bighorn 2.0's in 29" without lift? I'm considering running these tires with either wheel spacers on the stock rims, or with a rim that has a bit more offset..

Any help appreciated

Here are pics of my pioneer with 30" Evos which measured 28" under the vehicle.

They barely fit





Any bumps while turning will make these tires rub. I don't know the actual height of the big horn tires.

 

[Carleton]

Here are pics of my pioneer with 30" Evos which measured 28" under the vehicle.

They barely fit





Any bumps while turning will make these tires rub. I don't know the actual height of the big horn tires.

Thanks for the info! So are you going to add a lift or different A arms? Also, are your new wheels offset more than stock? I'm hoping if I run wheel spacers I'll be able to run the 29" bighorns. How do you like those Evos? Look like a sweet tire.

 

[joeymt33]

Thanks for the info! So are you going to add a lift or different A arms? Also, are your new wheels offset more than stock? I'm hoping if I run wheel spacers I'll be able to run the 29" bighorns. How do you like those Evos? Look like a sweet tire.

I love the Evos. They are a great tire but the 30" version isn't true to its advertised size.

Therefore, I bought some Roctanes. I already had some forward and lifted A-arms so I really wanted to run some 30's.

 

[HivoltageHonda]

A guy on Facebook has 29" bighorns all stock and says no rubbing. I ordered a set they will be here Wednesday. I will post pics when I get them mounted

 

[Delton]

A guy on Facebook has 29" bighorns all stock and says no rubbing. I ordered a set they will be here Wednesday. I will post pics when I get them mounted

I'm curious to hear how you make out with them. You don't have a lift correct? I did plenty of scraping today so would love to go with some 29's

 

[HivoltageHonda]

Yes I have no lift. I hope they fit. I remember reading somewhere that as long as it is under a 30" tire and under 10" wide they would work on stock wheels. Keeping my fingers crossed.

 

[HivoltageHonda]

Does anybody know if the 29x9 and 29x11 will fit with stock wheels no lift? I remember seeing someone had that setup.

 

[Tot]

Does anybody know if the 29x9 and 29x11 will fit with stock wheels no lift? I remember seeing someone had that setup.

I should with no problems. On the first page I posted a picture of one on 29s with aftermarket wheel, but they looked like the same offset as stock. I may be wrong about the offset on the wheels.