P1000m3 30" tires?

[Just4fun]

 

[Admin]

 

[joeymt33]

View attachment 19598 View attachment 19599

I really like those tires. They're not heavy either are they? 6ply I believe.

What pressure are you running? And are they still 30"?

 

[Readman88]

 

[Readman88]

Almost 31". U definitely need lift and a arms to run 30 intimidators. That's with 8 psi

 

[joeymt33]

Almost 31". U definitely need lift and a arms to run 30 intimidators. That's with 8 psi

Wow, thank you very much. Right now I've got the CATVOS system so I should be good but I don't know if I want to go with a tire that big. I've got the 30" roctanes but sometimes I wish I had more low end power for hill climbs. I'm looking to go ~29". But those intimidators look to be an awesome tire.

Thanks again, sweet set up you've got!

 

[chadbo]

Right now the top of my list is the intimidators. I'm hoping @Readman88 comes thru with a ruler and picture soon.

Wow, thank you very much. Right now I've got the CATVOS system so I should be good but I don't know if I want to go with a tire that big. I've got the 30" roctanes but sometimes I wish I had more low end power for hill climbs. I'm looking to go ~29". But those intimidators look to be an awesome tire.

Thanks again, sweet set up you've got!

yeah I was told they run short well I may better think about something else without the arms. Damn I like those

 

[chadbo]

Wow, thank you very much. Right now I've got the CATVOS system so I should be good but I don't know if I want to go with a tire that big. I've got the 30" roctanes but sometimes I wish I had more low end power for hill climbs. I'm looking to go ~29". But those intimidators look to be an awesome tire.

Thanks again, sweet set up you've got!

Well someone tell me the 28s run close to 29

 

[joeymt33]

Well someone tell me the 28s run close to 29

Me too!

 

[jasontjames]

I just put my 28" Rocktanes on last night. From my eyeball test I would say that they run bigger than 28. I will measure them up tonight. I was too tired and sweaty to do it last night.

 

[chadbo]

Me too!

Joey I've been looking for awhile now and had a thread on outback max and terminators when Intimidaters took over the thread. 28s where said to run 27 1/2 and I was lead to believe 30s where short... Could some be made in China and others not or something

 

[joeymt33]

Joey I've been looking for awhile now and had a thread on outback max and terminators when Intimidaters took over the thread. 28s where said to run 27 1/2 and I was lead to believe 30s where short... Could some be made in China and others not or something

You should look at the Blackwater Evo's, When aired up to higher psi they will be 29 inches fairly easy. I did a lot of pictures and measurements on those tires when I had them. You can find the thread in the pioneer 1000 wheels and tires section.

Also, they just come out with a 32 inch version but it requires a 15 inch wheel

 

[joeymt33]

Here's the thread. Delton has been running them and beating them pretty hard and they hold up well. Sometimes I wish I didn't sell them to him.

//hondasxs.com/threads/blackwater-evos-30x10-14.4402/

 

[chadbo]

Here's the thread. Delton has been running them and beating them pretty hard and they hold up well. Sometimes I wish I didn't sell them to him.

P1000 - Blackwater Evo's 30x10-14

Triple post... You really wanted me to check out that thread yeah I'm keeping those in mind. Might do 10 front 11 back replacing stock in the 28

 

[joeymt33]

Triple post... You really wanted me to check out that thread yeah I'm keeping those in mind. Might do 10 front 11 back replacing stock in the 28

Yeah, really! What was up with that? I guess I had short term memory loss and just kept sending it's fixed now.


Sent from my iPhone using Tapatalk

 

[Boomboom907]

I just placed an order for 30 inch intimidators. I have the high lifter arms and the high lifter 2.5 lift.


Will I have any problems?

 

[chadbo]

I just placed an order for 30 inch intimidators. I have the high lifter arms and the high lifter 2.5 lift.


Will I have any problems?

You already ordered.... We'll know soon... I would think so but some things I've been wrong about before. What offset rim or are they going on stock?

 

[Readman88]

I just placed an order for 30 inch intimidators. I have the high lifter arms and the high lifter 2.5 lift.


Will I have any problems?

I don't think you will. Mine fit with just lift and rub at about half turn but the HL arms r supposed to move tires forward 1.5" and with that they should clear fine. I have a arms in the shop I just have to find time to install them. They r a very heavy tire and at 31" they r going to rob ALOT of power from the machine

 

[P1k]

View attachment 19430

Looks great! How is the bike handling the 30's in the mud? I'm wanting 30's also just wanted to see how the bike is handling the 30's before I order them.

 

[Readman88]

Looks great! How is the bike handling the 30's in the mud? I'm wanting 30's also just wanted to see how the bike is handling the 30's before I order them.

It doesn't really like them in reverse if u get in any thick mud. It will spin them great in low but the intimidators r a really heavy tire and they measure almost 31"

 

[harrelljr99]

Does anyone have 30" tires on a 1000 with HL a arms without a lift?


Sent from my iPhone using Tapatalk