All things R/C

[Average_Joe]

 

[Admin]

 

[Adam490]

Are the little revos tough? Thinking about that or just saying f*** it and getting a Maxx for the kid with the throttle set at 10-15%.

 

[Adam490]

What kind of run time do you get?

About 45 minutes. But I'm not running wide open all the time. Usually take it with us when I go walking with the kid and it easily makes it the mile around the neighborhood with some very spirited driving.

 

[Average_Joe]

Are the little revos tough? Thinking about that or just saying f*** it and getting a Maxx for the kid with the throttle set at 10-15%.

They are tough and fast all the upgrades I did weren't necessary. My first one i put sand paddles and was running it into a half buried concrete parking spot marker launching it off it I did that for a full pack and didn't break anything the chassis was slapping it every jump. The sand paddles I was using would throw sand over my head on 3s. The only time I really broke anything I hit a concrete marker with the front left wheel WOT. I was on a r/c oval the marker was the entrance to a onroad track. I have had 2 I dont recall really breaking anything outside of burning my slipper that was the first slipper in 5 years.

I think the Summit tires are just too heavy for it Traxxas put out a 1/16 Summit VXL for one year it was hard on parts they now only offer it brushed again.

 

[Average_Joe]

If I did it over I would only do the center diff and heatsink on the motor on the mini-Revo. I would replace things as they wore out or broke I went and replaced everything needlessly.

 

[sspeederr]

 

[gullyjumper]

Now that is a plane !

 

[Adam490]

Here's a good scale picture 🤪

From left

1/24 - Kyosho Mini-Z FWD
1/24 - Axial SCX24
1/18 - Losi Mini-T 2.0
1/10 - Team Associated RC10B4
1/5 - Traxxas XMaxx

 

[Average_Joe]

Damn those are some nice planes I would like to know what radio and engine you have/had in them.

 

[Average_Joe]

Here's a good scale picture 🤪

From left

1/24 - Kyosho Mini-Z FWD
1/24 - Axial SCX24
1/18 - Losi Mini-T 2.0
1/10 - Team Associated RC10B4
1/5 - Traxxas XMaxx

View attachment 233334

Those mini-z's are sharp and I was looking at parts for them on A-Main you can dump quite a bit of money into them. The mini-z crawler is nice i was looking at getting a drifting mini-z.

 

[Average_Joe]

Im looking at replacing that pro-line light bar with one from Vanguish by Rigid they offer them in 1-6in wide. I was surprised to see you can get vision x, kc lites, rigid light bars and pods for r/c vehicles.

 

[sspeederr]

Damn those are some nice planes I would like to know what radio and engine you have/had in them.

Thanks ya lot invested here and thats just a few of the rc I have if its controlled by radio I've probably got something similar or had lol the orange plane is running a da 170cc and red one is running a eme 100cc all of my plans are flown off a Jr 11x

 

[Fatsquatch]

Wheels and tires for the SCX24’s arrived.

 

[Smitty335]

Wheels and tires for the SCX24’s arrived.
View attachment 233649View attachment 233650View attachment 233651View attachment 233652

View attachment 233648

How much PSI do you run in the tires? HA!

 

[Fatsquatch]

How much PSI do you run in the tires? HA!

All the PSI! lol

 

[Average_Joe]

Thanks ya lot invested here and thats just a few of the rc I have if its controlled by radio I've probably got something similar or had lol the orange plane is running a da 170cc and red one is running a eme 100cc all of my plans are flown off a Jr 11x

View attachment 233554 View attachment 233555 View attachment 233556 View attachment 233557 View attachment 233558 View attachment 233559

Gorgeous planes the largest my dad had a was a 90cc Extra 300 he only used JR radios his first digital was the XP8103 before the digital it was the Century 7 he still has and works. I grew up watching Patty Wagstaff fly her Extra300S. Later in life my dad and I ended up working together in St. Augustine for Northrop Grumman and one Friday afternoon we hear a plane buzzing our hanger it's Patty practicing for the airshow.

Patty Wagstaff

 

[Adam490]

Wheels and tires for the SCX24’s arrived.
View attachment 233649View attachment 233650View attachment 233651View attachment 233652

View attachment 233648

Mounting those stupid stamped RC4WD wheels was awful until I found a couple longer screws to start them!

 

[Adam490]

Any of you boys have any desire for an Axial SCX10? I've got two I want to part with to make room for one of these:

Element RC Enduro Gatekeeper 1/10 Rock Crawler Builders Kit [ASC40110]

The Element Enduro Gatekeeper 1/10 Rock Crawler Builders Kit delivers the performance to tackle the trails with confidence, and the durability... ASC40110

www.amainhobbies.com

 

[sspeederr]

Any of you boys have any desire for an Axial SCX10? I've got two I want to part with to make room for one of these:

Element RC Enduro Gatekeeper 1/10 Rock Crawler Builders Kit [ASC40110]

The Element Enduro Gatekeeper 1/10 Rock Crawler Builders Kit delivers the performance to tackle the trails with confidence, and the durability... ASC40110

www.amainhobbies.com

What u got and what u want

 

[Smitty335]

What u got and what u want

Ok what in the hell is it and how much? Is it fast enough to chase the dam cat?