All things R/C

[Average_Joe]

i started in it with a frogg, then the rc10 gold pan, have 4 of those. then rc10-t, 10-t GT, sc-10, a few losi's, and some others i can't remember. sure makes me feel old. i raced with Mcallister he lived around the corner from me. his pan car was the best on the market. raced all over CA with thunder drom, ranch pit stop, others i can't remember now. got rid of most my trophies. got out of RC and into racing dirtbikes.
i might have to dig them out and see if anyone them still work.

My first r/c was the raider buggy, I was started on r/c's at a very young age 4/5ish my dad has flown helicopters and planes since the 70's I have some fun stories about his shenanigans getting the cops called for flying a UFO disc it had the neighborhood in a panic thought they were being invaded it was sliver top and bottom and 4 feet round the flight controls were clear acrylic. My dads from Buffalo NY he used to tell me he had to launch r/c's by hand from his convertible in the winter the engines were too cold to start he ran the heater fired them up drop the top and launched them.

 

[Admin]

 

[NTCPrezJB]

My first r/c was the raider buggy, I was started on r/c's at a very young age 4/5ish my dad has flown helicopters and planes since the 70's I have some fun stories about his shenanigans getting the cops called for flying a UFO disc it had the neighborhood in a panic thought they were being invaded it was sliver top and bottom and 4 feet round the flight controls were clear acrylic. My dads from Buffalo NY he used to tell me he had to launch r/c's by hand from his convertible in the winter the engines were too cold to start he ran the heater fired them up drop the top and launched them.

That’s awesome

 

[Average_Joe]

That’s awesome

He has stories for days i need to go get some of his old photos and scan them. He has photos on a navy base flying r/c helicopters he had the plans for the ufo memorized it isn't a model you can buy he has photos of him building in various stages. The cops had a good laugh when they found out it was r/c they had enough calls they had to investigate it. He has slides of Vietnam and photos of his bombed bunker one slide he's holding a guitar the next slide its turned around the back is missing it was in the bunker.

 

[Average_Joe]

What size nut holds the wheels on the SCX24? I don't have anything that small I have tires and rims for it.

 

[Fro]

Here’s a pic of my Maxx after running up a couple of battery packs. I made the mistake of letting my girls drive it. Now I’m looking at buying a couple of the 1/16 sized E-Revo models.

 

[NTCPrezJB]

What size nut holds the wheels on the SCX24? I don't have anything that small I have tires and rims for it.

I believe the Traxxas wheel wrench fits it if you have one of those.

 

[Adam490]

What size nut holds the wheels on the SCX24? I don't have anything that small I have tires and rims for it.

I think they are 4mm

 

[Average_Joe]

I bought 1/16 Summit tires for the mini-Revo and brought it on vacation to the mountains. I didn't get through 1 3s pack I sent the slipper up in flames. We were sitting by the fire and I found a deal on the X Maxx its a combo deal 2ea 4s lipos and a charger through R/C Superstore. I showed Jannine the deal then went looking for a hobby shop near us to try and buy a new slipper and she bought it on her phone then said merry Christmas.

I have a green X Maxx on the way.

 

[Average_Joe]

X Maxx Combo

 

[ProudDadOf5]

I have a couple toys.. 😉

My Terremoto 10v2, 4x4 Lipo 3 cell does 45mph..

After that jumpdd he said jump me!! 🤗

 

[Tundra20]

I had a monster truck hpi savage jumped it off roof of my shop once 😂 man that thing was tough weighed like 20lbs u didn’t wana get hit with it 😂

 

[ProudDadOf5]

I had a monster truck hpi savage jumped it off roof of my shop once 😂 man that thing was tough weighed like 20lbs u didn’t wana get hit with it 😂

LMAO, hell no you don’t.. It hurts like James Canns ankles in Misery!! 🤬

 

[NTCPrezJB]

Pipe mountain obstacle we built today. I will get a few run videos uploaded to YT and post the links.

 

[Adam490]

Pipe mountain obstacle we built today. I will get a few run videos uploaded to YT and post the links.
View attachment 231831

Was going to mess around in my little course today. When I pulled it out, the foam had basically turned to dust in the attic lol. Apparently that cheap gap-filler foam in a can doesn't hold up well to 130*+

 

[NTCPrezJB]

Was going to mess around in my little course today. When I pulled it out, the foam had basically turned to dust in the attic lol. Apparently that cheap gap-filler foam in a can doesn't hold up well to 130*+

That’s unfortunate. I wouldn’t have guessed that.

 

[Smitty335]

Was going to mess around in my little course today. When I pulled it out, the foam had basically turned to dust in the attic lol. Apparently that cheap gap-filler foam in a can doesn't hold up well to 130*+

Hope you are using a good air filter?

 

[Adam490]

Hope you are using a good air filter?

I just reuse my old Pioneer filters taped together. Is that good?

 

[Adam490]

That’s unfortunate. I wouldn’t have guessed that.

It's been facing the hottest corner of the roof for going on 4 years now. It was literally a few cans of that gap filler yellow stuff on some particle board. I had silicon'd some branches and stuff on there and they all held, but the foam disintegrated when I touched it.

 

[Smitty335]

It's been facing the hottest corner of the roof for going on 4 years now. It was literally a few cans of that gap filler yellow stuff on some particle board. I had silicon'd some branches and stuff on there and they all held, but the foam disintegrated when I touched it.

You guys have got to get your poop together, other wise your going to the poop for brains cellar!

 

[Average_Joe]