P1000 Any ideas?

tr005

tr005

Well-Known Member
Lifetime Member
Aug 18, 2017
491
2,660
93
Big Rapids, Mi.
Ownership

  1. 1000-5
Anyone have an ideas where this might have come from? ‘16’ 1000/5 deluxe . Looks like a worm screw from a hose clamp. Don’t see any clamps of this size on the machine. Went riding yesterday at a place that gets a lot of orv traffic and lots of sand. Found it after I got done blowing the dust off with air compressor by the front. Possibly picked up by front tires and dropped in a-arm gaurds?
54CB58EA 23DE 4EC9 B864 2EBAB58BE4E6
F50474A8 066A 4B6D B5E5 3AC176A5218C
 
  • Like
Reactions: Remington and BWAF
J

JTW

Guest
Which guard.. passenger front? There’s a hose clamp right there off the intake.
 
  • Like
Reactions: BWAF
tr005

tr005

Well-Known Member
Lifetime Member
Aug 18, 2017
491
2,660
93
Big Rapids, Mi.
Ownership

  1. 1000-5
Which guard.. passenger front? There’s a hose clamp right there off the intake.
Found it on the ground after blowing off the machine. The clamp by the intake is still there as are the others. This screw is much bigger than the clamps on the intake. Was wondering if there were other clamps I can’t see without tearing everything apart.
 
  • Like
Reactions: JTW and BWAF
Remington

Remington

Deputy Fife POIDH Enforcement Officer
Lifetime Member
Supporting Member
Jul 24, 2016
18,753
107,320
113
Michigan
Ownership

  1. 1000-5

  2. Talon X
That looks like a standard hose clamp bolt. Much like the ones I use servicing generators. If my memory serves me correctly, I don’t think out intakes use standard hose clamps. Similar but slightly smaller.
 
J

JTW

Guest
Found it on the ground after blowing off the machine. The clamp by the intake is still there as are the others. This screw is much bigger than the clamps on the intake. Was wondering if there were other clamps I can’t see without tearing everything apart.
Lol.. maybe somebody pitched it in to f*** with ya?
 
  • Like
Reactions: tr005 and BWAF