P1000 Best offset for P1000 - same for all 4 corners.

[txsurfer]

First can someone explain the offset terminology. I want to eventually run 28x10-14's in all 4 corners. I need to buy a spare rim so figure I might as buy one of what I want later now.

 

[txsurfer]

Think this is what I want - whats the best choice for the P1000

HD5 Beadlock
SIZE BOLT PATTERN OFFSET FINISH PART #
14x7 4/156 5+2 Machined & Gloss Black 14HB503
14x7 4/137 5+2 Machined & Gloss Black 14HB507
14x7 4/110 5+2 Matte Black 14HB520
14x7 4/156 5+2 Matte Black 14HB523
14x7 4/137 5+2 Matte Black 14HB527
14x7 4/115 5+2 Matte Black 14HB529
14x9 4/156 5+4 Machined & Gloss Black 14HB5039
14x9 4/137 5+4 Machined & GlossBlack 14HB5079
14x9 4/156 5+4 Matte Black 14HB5239
14x9 4/137 5+4 Matte Black

 

[GlockMeister]

I have the 5+2 on all 4 corners....is this the best..i dunno..but it is about the most common.

 

[ToddACimer]

I think you're going to have to run spacers on the rear axle if you want the same track width front and rear. Even with stock wheels and 28's the front tires stick out further than the rears.

 

[txsurfer]

Last question ( maybe) - should I run 7" in front and 9" in rear or 7 or 9's in all 4 corners. Also will a 9" tire work on a 9" rim ( for a spare - I have the tire already)?

 

[joeymt33]

Last question ( maybe) - should I run 7" in front and 9" in rear or 7 or 9's in all 4 corners. Also will a 9" tire work on a 9" rim ( for a spare - I have the tire already)?

I would get the same size all the way around.

You’ll need 1” spacers for the rear IF you want the rear track width to match the front.

For the spare, I just use a front stock wheel/tire. It’s small and light vs a matching 30” tire (or 28” for you). It will still drive fine and get you out of the woods.

Is far as the width of the wheels, I prefer the more narrow wheels so that they do not get beat up as bad. The 7” wheels have been treating me good.

 

[zmnypit]

28x10x14 outback max mounted on 14x7" wheels on a 3.5 offset on all four on mine.

 

[Windrock1000]

Ran both offsets. 5+2 and 3.5s. Like the 3.5s the best. Gives a wider footprint.

 

[sugarray]

Ran both offsets. 5+2 and 3.5s. Like the 3.5s the best. Gives a wider footprint.

Dave, do you still have spacers on the rear, too?

 

[Windrock1000]

Dave, do you still have spacers on the rear, too?

Yes. 1” in front and 2” in rear. I’m about 68-69 inches wide. Very stable.

 

[Ragnar406]

Ran both offsets. 5+2 and 3.5s. Like the 3.5s the best. Gives a wider footprint.

Yes. 1” in front and 2” in rear. I’m about 68-69 inches wide. Very stable.

I like the 3.5's too way better feel than the factory wheels. What was your reason for wanting to go with the Spacers in addition? I love you new wheels and seriously considering the front A arms to run some bigger than 28" tires.

 

[Windrock1000]

I like the 3.5's too way better feel than the factory wheels. What was your reason for wanting to go with the Spacers in addition? I love you new wheels and seriously considering the front A arms to run some bigger than 28" tires.

You need to run a 1 “ spacer in the rear when you go after market wheels to even up things. I had the spacers already so just used them.

 

[Ragnar406]

You need to run a 1 “ spacer in the rear when you go after market wheels to even up things. I had the spacers already so just used them.

I have been running some 3.5 for a while and finally order some 1" spacers to try out on the back tires. They should be here tomorrow and I will install and test out.

 

[Windrock1000]

I have been running some 3.5 for a while and finally order some 1" spacers to try out on the back tires. They should be here tomorrow and I will install and test out.

I’m running 1” on fronts and 2” on Rears. I really like them. Just use locktite and cross torque to 82 pounds. Mine as never loosen up! I believe you will be pleased.

 

[Sckottty]

28x10x14 outback max mounted on 14x7" wheels on a 3.5 offset on all four on mine.

View attachment 57670
View attachment 57671
View attachment 57672

How the 3.5 offset work for you. I just bought method bead lock 12”x8” 4” offset. Put 28”x9-12 front and 28”x11”-12 on back, I’m looking for a wide stance. I have a 2” highlift

 

[GreenRockpioneer]

28x10x14 outback max mounted on 14x7" wheels on a 3.5 offset on all four on mine.

View attachment 57670
View attachment 57671
View attachment 57672

Whats you clearance?