P1000 Cover for shifter holes

[Montana]

This seems to work very well. No holes to drill. I used the existing bolt holes and converted to studs. I will see what more will cost I paid $125.00 with computer time. I think a duplicate will be $75. I do have more rubber I will donate

 

[Admin]

 

[Delton]

That's an area that really needs looked at. Love your solution too. A ton of hot air comes through there. There was a relocate kit available for the radiator but I don't want it up behind my head lol. Nice job!

 

[ghost]

Looks good.
You might want to ask what 100 duplicates would cost
You can sign me up for a pre-order.

 

[JTW]

Awesome!

 

[joeymt33]

Sign me up!


CP: This group looked for anything rough and had a great time. It wasn't all about who was the best or correct line just some good ol boys with a beer and a 4wd.

 

[Delton]

Make it 4

 

[truc577]

I'm in!!!!!!!

 

[CPope]

Be nice to get them powder coated like @mystic1219 switch plates

 

[ebkoz]

Maybe mount this around the openings (from the inside). Pemko Brush Door Bottom Sweep, Clear Anodized Aluminum with 0.625" Gray Nylon Brush insert, 0.25" Width, 1.375" H x 36" L: Industrial Hardware: Amazon.com: Industrial & Scientific

 

[Jakey]

Patent the design so Honda has to buy it from you to implement on new models

 

[Delton]

Maybe mount this around the openings (from the inside). Pemko Brush Door Bottom Sweep, Clear Anodized Aluminum with 0.625" Gray Nylon Brush insert, 0.25" Width, 1.375" H x 36" L: Industrial Hardware: Amazon.com: Industrial & Scientific

This shows promise as well. I bet it'd work.

 

[pgiannetto65]

I'll take one


Sent from my iPhone using Tapatalk

 

[elkguide]

Great idea. Keep on tweaking.

 

[ohanacreek]

I'm in for one

 

[rubicon05]

I'm interested in one.

 

[Cecilspears89]

That's an area that really needs looked at. Love your solution too. A ton of hot air comes through there. There was a relocate kit available for the radiator but I don't want it up behind my head lol. Nice job!

I designed a custom radiator relocation. I build them and sell them


Sent from my iPhone using Tapatalk

 

[Amre2me2]

I used a piece of black foam I had laying around the shop. Cut it down to an inch thick, cut slots in it for the lever to slide through. Used some contact cement to attach it to the back side of the dash. Stops all the hot air that was coming through.

 

[Eltobgi]

I designed a custom radiator relocation. I build them and sell them


Sent from my iPhone using Tapatalk

Let us see a few pictures

 

[Delton]

I used a piece of black foam I had laying around the shop. Cut it down to an inch thick, cut slots in it for the lever to slide through. Used some contact cement to attach it to the back side of the dash. Stops all the hot air that was coming through.

Pics? I haven't addressed this on mine yet so looking for ideas.

 

[Delton]

I designed a custom radiator relocation. I build them and sell them


Sent from my iPhone using Tapatalk

X2 on pics. Where is it located?