P1000 Crossroads 3D switch plate

[Jankyeye]

Just installed a Crossroads3D switch plate in place of the “Don’t die” placard on the dash board. First of all, I really wish I had found and done this first thing. The access to the other switch plates is soooooo much easier through the hole in the dash instead of trying to reach through the hood.
The install was simple and straight forward, the dash is really easy to cut with a sharp razor knife. They had several options available with pre etched cut outs that are easily trimmed out.

Switch Panel for 2022 Pioneer 1000 - Crossroads 3D

This 2022 Pioneer 1000 electronics switch panel mounts onto the Pioneer 1000 dash, replacing the warning label to the right of the shifters. It holds standard sized rocker switches and/or circular holes for USB or voltage meter mounting. This panel comes with all slots “closed” with removable...

crossroads3d.com

 

[Hondasxs]

@monaco sure makes great products.

Sent from my SM-G996U using Tapatalk

 

[packer58]

Yes, i have one of crossroads switch plates with the cell phone slot .......they make a great product for sure ....

 

[monaco]

Just installed a Crossroads3D switch plate in place of the “Don’t die” placard on the dash board. First of all, I really wish I had found and done this first thing. The access to the other switch plates is soooooo much easier through the hole in the dash instead of trying to reach through the hood.
The install was simple and straight forward, the dash is really easy to cut with a sharp razor knife. They had several options available with pre etched cut outs that are easily trimmed out.

Switch Panel for 2022 Pioneer 1000 - Crossroads 3D

This 2022 Pioneer 1000 electronics switch panel mounts onto the Pioneer 1000 dash, replacing the warning label to the right of the shifters. It holds standard sized rocker switches and/or circular holes for USB or voltage meter mounting. This panel comes with all slots “closed” with removable...

crossroads3d.com

View attachment 365873 View attachment 365874 View attachment 365875

Looks good man!

 

[Mark in Northern Iowa]

VERY!!! happy with my Crossroads3D switch plate. 👍
.

.
Before someone asks what the white button is for.
Voltage check with out turning on the key.

.
Have a good day

 

[Rayger143]

VERY!!! happy with my Crossroads3D switch plate. 👍
.
View attachment 365949
.
Before someone asks what the white button is for.
Voltage check with out turning on the key.
View attachment 365950

View attachment 365951
.
Have a good day

I wanna know what the WTF button is for.

 

[highpocket74]

I like their stuff too. Well, thought-out designs and prints look high quality. Kudos!

 

[Laughlin74]

I had him make a custom one for me. Just what I asked for.

 

[TripleB]

VERY!!! happy with my Crossroads3D switch plate. 👍
.
View attachment 365949
.
Before someone asks what the white button is for.
Voltage check with out turning on the key.
View attachment 365950

View attachment 365951
.
Have a good day

You need some hand lotion.

 

[monaco]

Before someone asks what the white button is for.
Voltage check with out turning on the key.

View attachment 365951

Love this - brilliant!

 

[Mark in Northern Iowa]

You need some hand lotion.

"It rubs the lotion on it's skin, or else it gets the hose again."
hahaha
.
Have a good day

 

[Mark in Northern Iowa]

I wanna know what the WTF button is for.

My panel is powered when the key is turned on. All power from aux battery
.
WTF is powered from the aux side, and powers the switch panel without turning on the key.
.
Flux Capacitor is powered from from the aux side, it powers on a 12V continuous duty solenoid, direct connecting aux battery to primary battery, in the unhappy event that the primary goes dead.
.
Do I use them very often?
s***, I don't even have em hooked up yet.
BUT that is the plan..
hahahahaha
.
Have a good day

 

[Smitty335]

My panel is powered when the key is turned on. All power from aux battery
.
WTF is powered from the aux side, and powers the switch panel without turning on the key.
.
Flux Capacitor is powered from from the aux side, it powers on a 12V continuous duty solenoid, direct connecting aux battery to primary battery, in the unhappy event that the primary goes dead.
.
Do I use them very often?
WTF, a few times.
Flux Capacitor, not once, but it is there if I need it.
.
Have a good day

Do you have the wiring diagram for the flux capacitor? Very much interested.

 

[Mark in Northern Iowa]

Do you have the wiring diagram for the flux capacitor? Very much interested.

.
Don't be laughing at my powerpoint skills. haha
.
edit to add
Looking at that a little more, probably should have the switch power a relay, and the relay power the solenoid.
.
Have a good day

 

[Mark in Northern Iowa]

Love this - brilliant!

Thanks, it came with a set of string dome lights I put in my pickup bed.
The button IS the TEST button. Free is free. haha
Similar to this
.

.
Have a good day

 

[Smitty335]

View attachment 365969
.
Don't be laughing at my powerpoint skills. haha
.
edit to add
Looking at that a little more, probably should have the switch power a relay, and the relay power the solenoid.
.
Have a good day

Makes perfect since!