J
If you dont have pulley like he has you should get one.Helps alot.
I have the same forward tilt on the feet as well. I have a similar circumstance with my driveway and would like to see them sit a bit flatter.I’m going to piggy back off this thread rather than start another. The past two days I got to try out my DenaliPro for the first time on my P3-1000. Had to make a few adjustments and one of them was trying to get the feet to land flat when the plow goes down. The shortest side on the stop blocks gives me the most vertical position but the feet are still tilted forward a bit. Has anyone run into this and have a fix? Do I need to grind the edge of the blocks some? I have a number of steep drops in my driveway and I think the plow would ride better if the feet were perfectly flat to the ground - or even a bit rearward tilted.
The way the blocks work it seems like the best fix is to grind off 1/8” on the shortest side - or find something else to use for stops. Hoping someone has a solution. Wonder if this tilt is a widespread issue - or design?I have the same forward tilt on the feet as well. I have a similar circumstance with my driveway and would like to see them sit a bit flatter.
I had a bunch of pics that I was sending to the Motoalliance engineer when I was trying to get this straight some months back but I must have deleted them when I gave up. I use their pulley kit with the reattach strap at the top of my bumper. The plow is put up for the year now.Vikes! Can we see a pic showing your winch rope where it routes through the shiv block and how you attached it back to the machine
I’ll try and take one of the plow tomorrowVikes! Can we see a pic showing your winch rope where it routes through the shiv block and how you attached it back to the machine
@Vikes79 is this what you did?I use their pulley kit with the reattach strap at the top of my bumper. The plow is put up for the year now
@Vikes79 is this what you did?
Don’t see where using the winch line would make any difference at all in the plow angle?View attachment 464504
I used 1/2 the pulley kit. The part that mounted where the fair lead goes I left int the box and just used my regular winch line.
I take my plow on and off a lot sometimes in winter and need to keep the winch line vs the little whip line the kit comes with.
It wouldn’t. I think you should try again in October. Enjoy the riding season!Don’t see where using the winch line would make any difference at all in the plow angle?
It doesn’t…I don’t believe I ever said it did. Your bolts and cam positions drive that.Don’t see where using the winch line would make any difference at all in the plow angle?
It doesn’t. It was a side conversation about his setup. They’re supposed to have better geometry for your winch line. Easier lifting easier on the line etc etcDon’t see where using the winch line would make any difference at all in the plow angle?