P700 Door Bushings confirmed!!!!

[RB3offroad]

Hello everyone, My name is Justin and I am with www.rb3offroad.com. We sell door replacement door bushing like the ones posted below to help fix the sag/ sloppiness in your stock doors. Originally these were made for the P1000 but have since been tested and confirmed to fit the p700 models. They were tested on the 2016 Model by @SundayRdr. You can see his confirmation post here P1000 - New door hinges.

 

[Admin]

 

[SundayRdr]

Hello everyone, My name is Justin and I am with www.rb3offroad.com. We sell door replacement door bushing like the ones posted below to help fix the sag/ sloppiness in your stock doors. Originally these were made for the P1000 but have since been tested and confirmed to fit the p700 models. They were tested on the 2016 Model by @SundayRdr. You can see his confirmation post here P1000 - New door hinges.

View attachment 60015
View attachment 60016

They are EXTREMELY easy to change out. The door hinges do have to be removed to change the bushings. I had about 1 inch of play in the driverside upper bushing. News one fixed that and the rattle at idle. 30 minutes with my 4yr old helping.

 

[ickes24]

Jusitn, do you offer a set for the 4 door models or is it just ordering 2 sets?
Also are there bushings on the tailgate? It is pretty loose too, especially when unlatched.

 

[RB3offroad]

The bushings come in sets of two doors, So yes you would just order the two sets. As far as the tailgate I am not sure if there is bushings in there as well I can take a look and get back to you. Have a nice day looking forward to making another happy customer!

 

[RB3offroad]

Here is a video on how to replace your rb3offroad.com doorbushings. I made this video with a pioneer 1000 but the door are the same as well as the steps to replace your door bushings. Thank you!

 

[RB3offroad]

BEFORE:

https://www.facebook.com/video.php?v=182389239165754

 

[RB3offroad]

AFTER:

https://www.facebook.com/video.php?v=182389932499018

 

[ickes24]

RB3 thanks for coming up with these bushings!
They make a huge difference in the doors. No more door rattles, they open and close much nicer too!
Very easy to install need to use a 6mm hex key for the hinge bolts!

 

[RB3offroad]

RB3 thanks for coming up with these bushings!
They make a huge difference in the doors. No more door rattles, they open and close much nicer too!
Very easy to install need to use a 6mm hex key for the hinge bolts!

Thanks, please share

 

[Smitty335]

Thanks, please share

Have you figured out how to keep the rear seat while folded up to stay that way, in the storage position, mine keep coming and creating a loud slap?

 

[str8edg]

AFTER:

https://www.facebook.com/video.php?v=182389932499018

What size Allen key is needed? From the video you said a 10mm and these look like Allen or hex heads. Thanks!

 

[Homer]

Only bolts to remove are the door hinges.
Then remove c clip with screwdriver.
Few tools needed.
Great product.

 

[Robobrainiac]

What size Allen key is needed? From the video you said a 10mm and these look like Allen or hex heads. Thanks!

You use a 10mm socket. No Allen.

 

[DG Rider]

What size Allen key is needed? From the video you said a 10mm and these look like Allen or hex heads. Thanks!

700 uses two 6mm allens on each hinge. They are tight.

 

[str8edg]

700 uses two 6mm allens on each hinge. They are tight.

Thanks for the confirmation and that is what I thought. I may buy a new 6mm to avoid any issues.

 

[Scoop]

You use a 10mm socket. No Allen.

If those are the same garbage 10mm bolts used on the door hinges for the P1K, I would advise you to replace them with hardened flange bolts. Also, don't use power or air tools to remove.

Two of my eight front door hinge bolts stripped (the head) while attempting to remove them with hand tools. They went into the trash and were replaced by Class 10.9 flange bolts (roughly equivalent of SAE Grade 8). If/when I have to remove the bolts for the rear doors, I will do the same there.

 

[Dirtstiffs-1000]

And...
Get a gripper 10 mm socket.
Hanson 53904 Irwin HAN53904 10mm Bolt Extractor Amazon.com

If not, get a set of Irwin easy - outs, drill bits and a drill, enjoy removing them.

 

[Scoop]

And...
Get a gripper 10 mm socket.
Hanson 53904 Irwin HAN53904 10mm Bolt Extractor Amazon.com

If not, get a set of Irwin easy - outs, drill bits and a drill, enjoy removing them.

If you replace them with Class 10.9 flange bolts as previously detailed, you won't need bolt extractors down the road.

Of course, you might need the above to GET them out ... but mine didn't start rounding off until they were already broke loose, so it was easy to remove them the rest of the way with some Vice Grips (and junk them immediately).

 

[Coeus]

If those are the same garbage 10mm bolts used on the door hinges for the P1K, I would advise you to replace them with hardened flange bolts. Also, don't use power or air tools to remove.

Two of my eight front door hinge bolts stripped (the head) while attempting to remove them with hand tools. They went into the trash and were replaced by Class 10.9 flange bolts (roughly equivalent of SAE Grade 8). If/when I have to remove the bolts for the rear doors, I will do the same there.

Did you order the bolts online? If so, can you post a link… I rounded out two of mine on the back doors

 

[Scoop]

Did you order the bolts online? If so, can you post a link… I rounded out two of mine on the back doors

Negative. Local hardware store.