Draft at shifter 1000-5

[Ironstone]

Any creative functional solutions to stop the cold draft at the gear shift on 1000-5 with cab?

 

[Admin]

 

[JenElio]

Any creative functional solutions to stop the cold draft at the gear shift on 1000-5 with cab?

There's a few options out there yes. Use the search bar up top on the right corner. Usually you'll find anything and everything going that route 👍


BTW, welcome to the club from South Florida.

If you're sticking around start an intro thread and post up some pics of your ride.

 

[dweber23tr]

I tried using a generic leather shifter boot but I couldn't make it work. I place an order with rad customs for their product 2 months ago and haven't received anything nor can I get ahold of the vendor. They took my money though!

 

[P1K5Dave]

I tried using a generic leather shifter boot but I couldn't make it work. I place an order with rad customs for their product 2 months ago and haven't received anything nor can I get ahold of the vendor. They took my money though!

He only does production runs every so often and the site says "in production," so yours will be coming.

This is the site @Ironstone

Home | Rad Customs, LLC

Rad Customs, radcustomsidaho.com, is a small 1-man business that manufactures custom after-market products for side by sides, particularly Honda Pioneer 1000.

www.radcustomsidaho.com

 

[Mopower58]

I have the RAD customs shifter covers. He works a real job besides RAD customs. It may take a while but he will get to it.In my case he was also waiting on the powder coater.

 

[dweber23tr]

He only does production runs every so often and the site says "in production," so yours will be coming.

This is the site @Ironstone

Home | Rad Customs, LLC

Rad Customs, radcustomsidaho.com, is a small 1-man business that manufactures custom after-market products for side by sides, particularly Honda Pioneer 1000.

www.radcustomsidaho.com

Good to know! I will go back to patiently waiting...

 

[Scoop]

Took a little while for mine to show up as well, but worth the wait. Definitely cuts down on the air moving through those spots.

 

[Bighat]

I used rubber from an inner tube. Made a cardboard design first and then transferred it to the rubber. It's not the best but it's better. Plus it's free. Took two screw drivers and worked in between the two plates on the dash.

 

[Remington]

Any creative functional solutions to stop the cold draft at the gear shift on 1000-5 with cab?

Welcome from Michigan

If you're sticking around start an intro thread and post up some pics of your ride.

☝️☝️☝️☝️THIS☝️☝️☝️☝️
#POIDH