P1000 Falling washers?

[Formula1]

I removed my seat back tonight along with the plastic piece and the rubber mats in preparation to install my cooling fans. As I was removing one of the push pins holding on the plastic engine cover piece, two washers fell out. Any idea why they were there?

 

[Admin]

 

[ToddACimer]

I removed my seat back tonight along with the plastic piece and the rubber mats in preparation to install my cooling fans. As I was removing one of the push pins holding on the plastic engine cover piece, two washers fell out. Any idea why they were there?

The metal bracket added to support the rubber seat heat shield has 2 washers on the pins through the bracket and rubber. They are a pain to install

 

[Formula1]

The metal bracket added to support the rubber seat heat shield has 2 washers on the pins through the bracket and rubber. They are a pain to install

Oh great! I looked through the service manual and it doesn't mention them. Any idea if there totally necessary?

 

[ToddACimer]

Oh great! I looked through the service manual and it doesn't mention them. Any idea if there totally necessary?

I'd try to put them back. The bracket won't stay on without

 

[Formula1]

So does the bracket fall also? I'm not sure what exactly I'm looking for.

 

[Formula1]

I found it, it fell as well. Now I just gotta figure out where it goes

 

[sek-hunter]

Between driver and middle seat. Look for a parts diagram. Seems like there are three plastic rivets that hold it in? I’ll look...


Sent from my iPhone using Tapatalk

 

[sek-hunter]

Found it but won’t let me post here.

hondapartshouse.com has the diagram


Sent from my iPhone using Tapatalk

 

[sek-hunter]

Found it but won’t let me post here.

hondapartshouse.com has the diagram


Sent from my iPhone using Tapatalk

Look at the seat bottom cover diagram.


Sent from my iPhone using Tapatalk

 

[Formula1]

Awesome thanks! Does it go between the frame and the cover of the air box?

 

[TripleB]

Awesome thanks! Does it go between the frame and the cover of the air box?

#15

 

[Formula1]

Thanks guys👍🏻