Scoop
Well-Known Member
Lifetime Member
Supporting Member
For door rattles, cut some pieces of vacuum or fuel line and zip tie them to the latch hoops. Same goes for the dump bed rattle.
hondasxs.com
I put pieces on both sides of the hoop, but you only need on on the side the latch contacts the hoop on.
For my fronts, I was able to adjust how far out the door bumper was.
P1000 - Scoop's 2021 P1K5 Deluxe Phantom Camo Build
If I'm not mistaken, most of your suspension components are all new. You may still need to account for sag once they break in. And, a little negative camber is good.
hondasxs.com
I put pieces on both sides of the hoop, but you only need on on the side the latch contacts the hoop on.
For my fronts, I was able to adjust how far out the door bumper was.
