P1000 First oil change synthetic plus gear oil synthetic results very noticeable

[Bighat]

Did the first oil change today. Changed everything, engine, sub and diff. Let me say that it make a mess with the skid plate. I 'm going to have to use way more towels on the next change. I've got card board under it right now because it's was dripping on my carport. But that's not why I posted. I took it for a ride and you could feel and hear the difference in the machine. It shifted smoother and quieter. Very noticeable, and I can't hear that well. I used the Honda 10w-30 HP4S in the engine and Amsoil 75w-90 in the differentials.

 

[Admin]

 

[Hondasxs]

Going to see what the hype is about.
Have a Pioneer and a Talon to do.
Hit up @highpocket74 if you need some.

Sent from my SM-G996U using Tapatalk

 

[Adam490]

Going to see what the hype is about.
Have a Pioneer and a Talon to do.
Hit up @highpocket74 if you need some. View attachment 329209

Sent from my SM-G996U using Tapatalk

Really like it in my machines. You tear down that subtrans yet?

 

[Hondasxs]

You tear down that subtrans yet?

No, Only popped a few times.
Paying attention is the key I think.

 

[Bighat]

I went for reverse today in a hurry and didn't get is all the way but I didn't hit the gas and heard a little cling and was like OH Sh?t. But not really cling just a little touching. You diffinitely need to watch what your doing.

 

[highpocket74]

I think

Going to see what the hype is about.
Have a Pioneer and a Talon to do.
Hit up @highpocket74 if you need some. View attachment 329209

Sent from my SM-G996U using Tapatalk

I think you’re going to like it. Changed my talon front and rear diff oil this weekend at 1900 miles. Should be good for a long haul now!!

 

[highpocket74]

I went for reverse today in a hurry and didn't get is all the way but I didn't hit the gas and heard a little cling and was like OH Sh?t. But not really cling just a little touching. You diffinitely need to watch what your doing.

You should try my shifter plate. Makes life better. I’ve never had a problem hitting reverse. Low is MUCH better with the plate cut as far back as possible! Rarely do I get any grinding. I’ve found that warming up the machine before using low helps a bunch. Still not perfect when your PUSHING a cable.

 

[Bighat]

I've looked at that before. Looks made well. I'd like to have one but I don't want to take the dash out. I just got the cab on. Don't get me wrong, I due want to take the dash out, just not right now. I want boot the shifters or something to stop the cold air in the winter.