P1000m5 FOX shocks spanner wrench size

[Seadonist]

Anyone know what size spanner wrench/ wrenches I need to adjust preload for n front and rear? Thanks


Sent from my iPhone using Tapatalk

 

[Rayger143]

I've borrowed spanner wrenches. Don't know what size they are. I hated using them. I found that if you jack your buggy up and loosen the lock nut I can adjust by putting on a pair of gloves and turning the spring. Anti seize on the threads helps.

 

[Rayger143]

https://www.amazon.ca/dp/B07VLTXDW7?psc=1&ref=ppx_pop_mob_b_asin_image&linkCode=gs2&tag=ho06120-20

 

[Seadonist]

Thanks Ray


Sent from my iPhone using Tapatalk

 

[Remington]

Used this one for years on my Fox’s

Progressive Suspension SW-783 3/8" Drive Preload Spanner Wrench https://www.amazon.com/dp/B0027G4XZ8?tag=sxsweb24-20

 

[john790]

I have a nice spanner wrench i cut the handle down worked good on the rears but no luck on the fronts i had to turn the springs.Just no room on the fronts.

 

[Dirtstiffs-1000]

Spanner set

they take a 2.5 front and 3.0 rear. I bought both and this spanner set, which worked well.
And one of these
it also worked.
The Fox wrenches had the best repetitive fit, but stupid expensive.

 

[Seadonist]

Spanner set

they take a 2.5 front and 3.0 rear. I bought both and this spanner set, which worked well.
And one of these
it also worked.
The Fox wrenches had the best repetitive fit, but stupid expensive.

Yeah, I saw the Fox set. They sure are proud of those wrenches


Sent from my iPhone using Tapatalk

 

[Smitty335]

Spanner set

they take a 2.5 front and 3.0 rear. I bought both and this spanner set, which worked well.
And one of these
it also worked.
The Fox wrenches had the best repetitive fit, but stupid expensive.

I just clean up the threads, lubricate jack it up a little break the locking mechanism lose and spin the spring.

 

[Dirtstiffs-1000]

I just clean up the threads, lubricate jack it up a little break the locking mechanism lose and spin the spring.

Good deal.
I did same on front and removal of oem rear spring.
My new 350# rear springs are too tough to hand tighten preload.

 

[Smitty335]

Good deal.
I did same on front and removal of oem rear spring.
My new 350# rear springs are too tough to hand spin preload.

Even jacked up? Like!

 

[Dirtstiffs-1000]

Even jacked up? Like!

Yes

 

[Seadonist]

After seeing the price of the Fox wrench set, I decided to just go with 4” portals. The price difference was negligible


Sent from my iPhone using Tapatalk