BOX1

P1000 front propeller

S

shadleyp

New Member
Lifetime Member
Jul 28, 2020
3
5
3
northern ca
Ownership

  1. 1000-3
I apologize if there is already a thread that answers these questions - if so please send me there otherwise I greatly appreciate any help you all might have. I have a 2016 Pioneer 1000 that has broken its front propeller shaft joint and I cannot seem to remove the front joint - the drive shaft is separate and out but I cant seem to remove the front section that is broken. Also do I have to remove more than just the floor board to access the front piece? Seems like there is only a small access panel that gives little to no access ... is there a secret? Also any recommendations on a complete assembled propeller shaft? I greatly appreciate the info I have already found on this forum! Thanks
 
Gabbas

Gabbas

Well-Known Member
May 17, 2020
280
700
93
Humboldt, Iowa
Ownership

  1. 1000-5
You need to unbolt the front diff and slide it forward. Take the wheels off. Loosen front diff , slide forward and then the prop shaft should slide off. From what I've been told. Not what I've done yet. Yet being the key word. I still need to.

Sent from my Pixel 4 using Tapatalk
 
Smitty335

Smitty335

Well-Known Member
Lifetime Member
Supporting Member
Oct 3, 2016
35,360
207,915
113
NWA Arkansas
Ownership

  1. 1000-3

  2. 1000-5
You need to unbolt the front diff and slide it forward. Take the wheels off. Loosen front diff , slide forward and then the prop shaft should slide off. From what I've been told. Not what I've done yet. Yet being the key word. I still need to.

Sent from my Pixel 4 using Tapatalk
Resit the big hammer, is all I have to say! HA!
 
Adam490

Adam490

HFA Grand High Wizard
Lifetime Member
Supporting Member
Apr 7, 2019
7,601
56,028
113
Covington, LA
Ownership

  1. 1000-5

  2. Talon R LV
This man knows the secret....

00100trPORTRAIT 00100 BURST20200626164015849 COVER

Seriously though, what @Gabbas said is how you'll need to get it out.
 
Remington

Remington

Sheriff Chief POIDH Enforcement Officer
Lifetime Member
Supporting Member
Jul 24, 2016
18,161
103,460
113
Michigan
Ownership

  1. 1000-5

  2. Talon X
Hondasxs

Hondasxs

Club Founder
Staff member
Lifetime Member
Supporting Member
Feb 13, 2013
17,952
62,637
113
Charlotte, NC
HondaSxS.com
Ownership

  1. 1000-5
Well, that sucks.
To install, you have to pull the front diff forward a few inches.
I don't think it has to be removed completely and seems like the axles and arms could stay as well.
Just leaving them in makes it a little more difficult but it's doable.

FYI, The joint can be replaced but last I heard they are on BO.

Check this out, I just added this to the store last week. I recommend this over OEM.
 
BOX2
box3

About us

  • Our community has been around for many years and pride ourselves on offering unbiased, critical discussion among people of all different backgrounds. We are working every day to make sure our community is one of the best.

User Menu

Buy us a beer!

  • Lots of time and money has gone into making sure the community is running the best software, best designs, and all the other bells and whistles. Care to buy us a beer? We'd really appreciate it!

    Beer Fund!

    Club Membership!