P1000 Got the Red one

[chadbo]

Just couldn't wait for silver

 

[joeymt33]

Same story here too. Congrats on the Deluxe!

 

[chadbo]

Same story here too. Congrats on the Deluxe!

Thanks... the red is nice I mostly wanted the darker rims but maybe I can get some of those m20s. The dealership had them with different offsets but was prolly with 156 pattern. wherever I looked online at 137 I think 3.5 was all they offered

 

[joeymt33]

I want those same wheels but I was hoping for a 5-2. I know what you're talking about when you say they are only offered in 3.5-3.5. If you're dealer has some at 5-2, I'm in!

 

[JACKAL]

Same story here too. Congrats on the Deluxe!

Me three I am not disappointed one bit this thing is a blast! This ain't grandpas gator.

 

[Johnny_C]

I found an orange one first, but it
was the red one I brought home.

John

 

[chadbo]

@ohanacreek needs a practice run on a red one in Mississippi setup with plastic dip, lights,radio,winch, highlighter lift when available and maybe I can handle the tires

 

[ohanacreek]

Yup, as soon as the silver is available is should be picking one up.

Waiting to see how durable the HighLifter kit is, the 700 HL Kit was CRAP. It bent and caused damage.

 

[JACKAL]

Waiting to see how durable the HighLifter kit is, the 700 HL Kit was CRAP. It bent and caused damage.

Ha! That's because they built it around PoPo service standards where its in the shop on a lift 1/2 of its life not run all the time like a bulletproof Honda.

 

[ohanacreek]

Ha! That's because they built it around PoPo service standards where its in the shop on a lift 1/2 of its life not run all the time like a bulletproof Honda.

From what I've seen personally You can use it for a 1 to maybe 2" lift but the 3" setting bends. It's not a single part and thin metal for a large suspension part without any bracing.

 

[chadbo]

The red one is getting black

 

[Hondasxs]

Looks good.
I played around with dimple patches today. I only did the drivers door as a test for next weekend's ride.
My concern is how much mud/sand/water will hold behind them and will that be a issue?

 

[chadbo]

Looks good.
I played around with dimple patches today. I only did the drivers door as a test for next weekend's ride.
My concern is how much mud/sand/water will hold behind them and will that be a issue?

I've covered the dimples now I used a 3/4 coupling to draw out circles and tried to line up but they need to be big as a Coke can

 

[chadbo]

I've covered the dimples now I used a 3/4 coupling to draw out circles and tried to line up but they need to be big as a Coke can

also kinda pimped out the HONDA lettering in back that might be to much,someone gave me a roll of chrome sticker I've never used in at least 8 years lol

 

[chadbo]

also kinda pimped out the HONDA lettering in back that might be to much,someone gave me a roll of chrome sticker I've never used in at least 8 years lol

View attachment 9238

 

[chadbo]

More painfully slower than Delton...Finally getting winch,strongmade lift and stick stoppers and the well is dry again

 

[chadbo]

More painfully slower than Delton...Finally getting winch,strongmade lift and stick stoppers and the well is dry again

Done a little to get stuff on the buggy today and don't really get wiring. Can I leave the toggle switch out of the winch install or should I run it for future switch in dash? Was gonna just use the wired remote for just incase situations

 

[chadbo]

Finally getting some stuff done

 

[chadbo]

And now

 

[chadbo]

Finally getting some stuff done

View attachment 19612 View attachment 19613

Painted the brackets on the lift and fair lead black and changed the hook to Kfi to stay with black. Lift has since leveled out. Now wiring the winch and getting new tires should have me ready