P1000 Honda license plate.

[Acmech1]

Well after not seeing any brackets I liked, and Oklahoma requiring lit license plate brackets, I took a chance on this. I like it. Now I am open to options for front signal indicators. I really am glad I chose CorbinCustoms for my kit though.

 

[Admin]

 

[Remington]

Welcome to the forum from Michigan.

Hell of an Intro with a mod review after being on here for a year and no post! Havent seen that before! Lol. Nice looking plate mod. Looks like you have a P1K5, what year, miles, other mods you have and type of riding do you do?

Go to the club store and get your signals.

Turn Signal Kits

store.hondasxs.com

 

[Acmech1]

Welcome to the forum from Michigan.

Hell of an Intro with a mod review after being on here for a year and no post! Havent seen that before! Lol. Nice looking plate mod. Looks like you have a P1K5, what year, miles, other mods you have and type of riding do you do?

Go to the club store and get your signals.

Turn Signal Kits

store.hondasxs.com

Made several purchases, just haven’t had much to say. Guess I need to add some photos.
2020 Pioneer 1000-5
Rockin Radios sound bar
Wheels and motor hammer tires
Skid plates
LE brush guard
Honda switch kit
Honda Roof
Reverse lights
Rock lights
Pillar lamps
Front led bar
Fox shocks
seizmek mirrors, lit
Dash switch panel
Seat covers
Turn signal kit
Under dash storage
Under seat storage
Rear bumper
Winch
Seat covers
Cup holders
Flip up windshield
Reverse light switch kit, winch switch
and
Various pigtails from Hondasxs store.
cargo and front floor mats.
I think that is all.

 

[Acmech1]

Welcome to the forum from Michigan.

Hell of an Intro with a mod review after being on here for a year and no post! Havent seen that before! Lol. Nice looking plate mod. Looks like you have a P1K5, what year, miles, other mods you have and type of riding do you do?

Go to the club store and get your signals.

Turn Signal Kits

store.hondasxs.com

Where are people putting front signal indicators on models with brushguards?

 

[JenElio]

Where are people putting front signal indicators on models with brushguards?

Use the search bar up top, lots of ideas on the subject.
@CumminsPusher did a nice job with his 👍

 

[Remington]

Made several purchases, just haven’t had much to say. Guess I need to add some photos.
2020 Pioneer 1000-5
Rockin Radios sound bar
Wheels and motor hammer tires
Skid plates
LE brush guard
Honda switch kit
Honda Roof
Reverse lights
Rock lights
Pillar lamps
Front led bar
Fox shocks
Rough Country mirrors, lit
Dash switch panel
Seat covers
Turn signal kit
Under dash storage
Under seat storage
Rear bumper
Winch
Seat covers
Cup holders
Flip up windshield
Reverse light switch kit, winch switch
and
Various pigtails from Hondasxs store.

View attachment 292952 View attachment 292953 View attachment 292954 View attachment 292955 View attachment 292956 View attachment 292958 View attachment 292959

Nice ride!

 

[Remington]

Where are people putting front signal indicators on models with brushguards?

Mine are black out. You can see the Bullet led’s at the bottom of the headlight

 

[Acmech1]

Mine are black out. You can see the Bullet led’s at the bottom of the headlight
View attachment 292968

Are the red ones turn signal? The black out look a whole lot better. I do have the template to drill those in that area. Did you have to move brushguard to drill out?

 

[Remington]

Are the red ones turn signal? The black out look a whole lot better. I do have the template to drill those in that area.

No, those are LED running lights n the head light. I drilled the signals freehand with my trusty measuring tape

 

[Acmech1]

No, those are LED running lights n the head light. I drilled the signals freehand with my trusty measuring tape

They look good. I was saying the kit I have, came with templates, but I did like where they were. I will just go ahead and put them there. Will change out to smoke later. Smoke looks much better. I saw some on a different bike that looked like your running lights that were turn signals, they were sequential.

 

[CumminsPusher]

Use the search bar up top, lots of ideas on the subject.
@CumminsPusher did a nice job with his 👍

I used switchbacks, was super cheap. Use the white for pulling into camp if trying to be mellow. Kinda hidden to so doesn’t kill look of machine

 

[Acmech1]

I used switchbacks, was super cheap. Use the white for pulling into camp if trying to be mellow. Kinda hidden to so doesn’t kill look of machine

September 2, 2021

youtube.com

That is what I am going for. I just do not like the look of where they are typically added.

 

[CumminsPusher]

That is what I am going for. I just do not like the look of where they are typically added.

I just uploaded better shot of both sides. ya I didn’t like the looks of what was typical. Didn’t buy a pre made system it was from scratch. Used taillights to which now systems incorporate

 

[Remington]

They look good. I was saying the kit I have, came with templates, but I did like where they were. I will just go ahead and put them there. Will change out to smoke later. Smoke looks much better. I saw some on a different bike that looked like your running lights that were turn signals, they were sequential.

I could do that if I wanted. Didn't feel like doing more wiring. I have more wiring and mod accessories than the 60's lunar module lol

 

[P1K5Dave]

There was a guy on fascistbook that had front signals that were made to fit in that spot I have circled in the image below. They sat in there nice and flush, looked like OEM.

I couldn't find them on a web search and I ditched that Orwellian s***hole over a year ago, but maybe someone can find them.

 

[Acmech1]

I could do that if I wanted. Didn't feel like doing more wiring. I have more wiring and mod accessories than the 60's lunar module lol

I hear that. I am done after the turn signals. I only did that after we got to option to go street legal in Oklahoma

 

[Acmech1]

There was a guy on fascistbook that had front signals that were made to fit in that spot I have circled in the image below. They sat in there nice and flush, looked like OEM.

I couldn't find them on a web search and I ditched that Orwellian s***hole over a year ago, but maybe someone can find them.

View attachment 293019

That would be pretty cool.

 

[Acmech1]

I just uploaded better shot of both sides. ya I didn’t like the looks of what was typical. Didn’t buy a pre made system it was from scratch. Used taillights to which now systems incorporate

Where are pics uploaded to? I can’t see them, but haven’t used this site much, other than to get stuff from the store

 

[StewB]

There was a guy on fascistbook that had front signals that were made to fit in that spot I have circled in the image below. They sat in there nice and flush, looked like OEM.

I couldn't find them on a web search and I ditched that Orwellian s***hole over a year ago, but maybe someone can find them.

View attachment 293019

I looked for lights that would fit that pocket and came up empty. It seems to be the logical choice and well protected.
I'll get photos of what I did and post later. Mine are not much different than yours.

 

[CumminsPusher]

Where are pics uploaded to? I can’t see them, but haven’t used this site much, other than to get stuff from the store

I just changed the above video to a better one