P700 Installing Back Up Lamps

[ChrisM]

I have found a couple of 3/4" white light 60 lumes round lights that would fit perfectly under the tail lamps for back up lights. I want to wire them into the back up harness and was wondering where I need to look for the plug? I've seen a couple of 700s with this mod on face book but no one gives much info as to how to install them.

I figure I can just direct wire them into the back up harness and when I put in reverse they will light up.

 

[Admin]

 

[Hondasxs]

I figure I can just direct wire them into the back up harness and when I put in reverse they will light up.

Correct,
You can splice them yourself if you like or buy this cheap pigtail - DIY Backup Light Harness for Honda Pioneer 1000 and Pioneer 700[2017+]
BUT, This ONLY is for 700's of years 2017+. Prior years do not have the backup alarm connector.

 

[ChrisM]

I have a 2020. Where is the plug at under the bed????

 

[Hondasxs]

I have a 2020. Where is the plug at under the bed????

Here.

 

[JimmyA]

I used the backup light harness as suggested, works great!

 

[ChrisM]

Here.
View attachment 185232View attachment 185233

Thank you..

 

[ChrisM]

These are what I'm planing on using as back up lights. Will be here tomorrow and I hope to install them that night.

Amazon.com: 10 Pcs TMH 3/4" Inch Mount White LED Clearance Markers Bullet Marker lights, side marker lights, led marker lights, led side marker lights, led trailer marker lights, trailer marker light: Automotive

Buy 10 Pcs TMH 3/4" Inch Mount White LED Clearance Markers Bullet Marker lights, side marker lights, led marker lights, led side marker lights, led trailer marker lights, trailer marker light: Side Marker Assemblies - Amazon.com ✓ FREE DELIVERY possible on eligible purchases

www.amazon.com

 

[Glock21user]

I used the harness as well from the club store wired it through a relay and works like a charm for this little bar.
Any questions just ask, lots of smarts on this forum to help.

 

[Glock21user]

These are what I'm planing on using as back up lights. Will be here tomorrow and I hope to install them that night.

Amazon.com: 10 Pcs TMH 3/4" Inch Mount White LED Clearance Markers Bullet Marker lights, side marker lights, led marker lights, led side marker lights, led trailer marker lights, trailer marker light: Automotive

Buy 10 Pcs TMH 3/4" Inch Mount White LED Clearance Markers Bullet Marker lights, side marker lights, led marker lights, led side marker lights, led trailer marker lights, trailer marker light: Side Marker Assemblies - Amazon.com ✓ FREE DELIVERY possible on eligible purchases

www.amazon.com

I am concerned that those are designed to be a clearance light and as such will have a very wide beam pattern and not far reaching.
Before you mount them permanently may I suggest going somewhere dark and trying one out first.
Great idea for sure don't get me wrong but doubtful to work well.

 

[Slackjaw]

Subscribed. This is my next mod.

 

[Glock21user]

Subscribed. This is my next mod.

Believe it or not, it was the easiest mod I did.
You will love being able to see without using flashlights or help.

 

[ChrisM]

I am concerned that those are designed to be a clearance light and as such will have a very wide beam pattern and not far reaching.
Before you mount them permanently may I suggest going somewhere dark and trying one out first.
Great idea for sure don't get me wrong but doubtful to work well.

That's my plan to test and see how much light they give off.

 

[ChrisM]

I've ordered the wiring harness posted above to simplify the wiring of the lights.👍

Also did a test of the light in a dark shop. Looks good to me. This is just one bulb should be fine with 2 of these.😁

 

[Corbun]

I have a 2016 and was able to tie into that plug without a wiring harness. I used these lights from amazon.


https://www.amazon.com/dp/B01A6TNWHW/?tag=sxsweb24-20

 

[ChrisM]

I have a 2016 and was able to tie into that plug without a wiring harness. I used these lights from amazon.


https://www.amazon.com/dp/B01A6TNWHW/?tag=sxsweb24-20

View attachment 185838

I was looking at this position and style lights but was concerned about them mudding up and becoming useless.

Is that an issue for you with them mounted there?

 

[Glock21user]

I've ordered the wiring harness posted above to simplify the wiring of the lights.👍

Also did a test of the light in a dark shop. Looks good to me. This is just one bulb should be fine with 2 of these.😁View attachment 185826View attachment 185828View attachment 185829

Looks nice, please make sure you keep us updated.
It is always nice to hear the good and bad of an install.

 

[Corbun]

I was looking at this position and style lights but was concerned about them mudding up and becoming useless.

Is that an issue for you with them mounted there?

Not an issue at all.

 

[ChrisM]

I have a 2016 and was able to tie into that plug without a wiring harness. I used these lights from amazon.


https://www.amazon.com/dp/B01A6TNWHW/?tag=sxsweb24-20

View attachment 185838

What brand and size tires are those? I'm wanting something like those but for stock rims, a 27 or 29s. I'm limited on garage door height so I can't do any real lifting of my buggy.

 

[Corbun]

They are Tusk Terrabites from Rockymountainatv.com

27x9x12 all around.
Paid $630 for new rims and tires.