P1000 Key On Power, Illumination, and backup source! - 2016 through 2021 Honda Pioneer 1000 Only

Hondasxs

Hondasxs

Club Founder
Staff member
Lifetime Member
Supporting Member
Feb 13, 2013
18,436
66,720
113
Charlotte, NC
HondaSxS.com
Ownership

  1. 1000-5

  2. Talon R
@Hondasxs . The three aux switches on 22 deluxe. Where is the termination end on those 3 ? It looks like they go under the front plastic, Do they double back and end in the big blue ball of tape Near the fuse panel?
Yes. There are 2 blue tapes. 1 is the switches, other is the new key-on power for 2022 models.
 
  • Like
Reactions: ODAMO and Smitty335
ODAMO

ODAMO

Well-Known Member
Oct 12, 2018
1,283
3,449
113
Ohio
Ownership

  1. 1000-3
Yes. There are 2 blue tapes. 1 is the switches, other is the new key-on power for 2022 models.
Thank you. Just like the other Honda owners manuals the Pioneer owners manual has a bit to be desired. EG: In the manual it says "Using the wrong oil filter may result in leaks or engine damage" But I have yet to find where the right filter is listed.
Without the few online places that list 2022 Pioneer 1000 parts AND You and all the other enthusiasts here things like this are harder to figure out. Thank you again 😄
 
J

Jsaint

Member
Oct 14, 2024
6
33
13
Germantown TN
Ownership

  1. 1000-5
According to Honda Accessory Instructions. Here is the recommended location for Key On Power for the Honda Pioneer 1000 Side by Side!

Honda suggest tapping the 15A Acc Fuse on the output side. Here you will find 2 WHITE with a BLACK STRIPE wires coming out of the output side of the fuse. You will need to untape the wire bunch to access them. It is recommended that you use a posi-tap (not shown) vs the wire tap-ins (shown) for a better error free connection.

View attachment 8398
Hey @Hondasxs i ordered the rear led lights with the trigger switch this week. I was gonna find a fuse running off key on power and use a fuse tap to supply power. Should any key on fuse work? Should I solder the connection point or crimp it and shrink wrap it? Thanks for the help don’t do much electrical work myself.
 
J

Jsaint

Member
Oct 14, 2024
6
33
13
Germantown TN
Ownership

  1. 1000-5
Hey @Hondasxs i ordered the rear led lights with the trigger switch this week. I was gonna find a fuse running off key on power and use a fuse tap to supply power. Should any key on fuse work? Should I solder the connection point or crimp it and shrink wrap it? Thanks for the help don’t do much electrical work myself.
It’s a 2024 base model p1k5…
 
NTCPrezJB

NTCPrezJB

President of #NTC
Lifetime Member
Supporting Member
Jan 30, 2018
108,396
956,447
113
Canton, OH
Ownership

  1. 1000-5
Hey @Hondasxs i ordered the rear led lights with the trigger switch this week. I was gonna find a fuse running off key on power and use a fuse tap to supply power. Should any key on fuse work? Should I solder the connection point or crimp it and shrink wrap it? Thanks for the help don’t do much electrical work myself.
The site store sells a key on power harness. Its plug and play if you are not real comfortable with electrical.
 
  • Like
Reactions: Jsaint and Red500
J

Jsaint

Member
Oct 14, 2024
6
33
13
Germantown TN
Ownership

  1. 1000-5
The site store sells a key on power harness. Its plug and play if you are not real comfortable with electrical.
Yea I saw that and grabbed one too 😂. Was wondering as I looked at the wiring diagram if I should install an in line fuse from the key on harness to the power, that’s when I had the idea to just use a fuse tap….
 
  • Like
Reactions: NTCPrezJB
Hondasxs

Hondasxs

Club Founder
Staff member
Lifetime Member
Supporting Member
Feb 13, 2013
18,436
66,720
113
Charlotte, NC
HondaSxS.com
Ownership

  1. 1000-5

  2. Talon R
For the 2024's. The ACC port top right of the battery will give you 12v to power the rear lights.
That is until you add more accessories and move to a fuse box.

 
  • Like
Reactions: NTCPrezJB
J

Jsaint

Member
Oct 14, 2024
6
33
13
Germantown TN
Ownership

  1. 1000-5
For the 2024's. The ACC port top right of the battery will give you 12v to power the rear lights.
That is until you add more accessories and move to a fuse box.

Hey that’s an even easier idea. I’ll save my key on harness I ordered for a blinker kit or something and use this for the rear lights. Thanks m
 
  • Like
Reactions: NTCPrezJB

About us

  • Our community has been around for many years and pride ourselves on offering unbiased, critical discussion among people of all different backgrounds. We are working every day to make sure our community is one of the best.

User Menu

Buy us a beer!

  • Lots of time and money has gone into making sure the community is running the best software, best designs, and all the other bells and whistles. Care to buy us a beer? We'd really appreciate it!

    Beer Fund!

    Club Membership!