P1000 lift kit

[Bronco]

hi everyone, looking for a lift kit for my 1000-3 LE that doesn't use wheel spacers this is my first buggy this thing is great

 

[Admin]

 

[GlockMeister]

hi everyone, looking for a lift kit for my 1000-3 LE that doesn't use wheel spacers this is my first buggy this thing is great

Here ya go.

2.5" Signature Series Lift Kit Honda Pioneer

 

[Bronco]

Here ya go.

2.5" Signature Series Lift Kit Honda Pioneer

sorry that won't work look at the note on the bottom of the page i have a 1000LE they want me to use wheel spacers i don't want use wheel spacers

 

[GlockMeister]

sorry that won't work look at the note on the bottom of the page i have a 1000LE they want me to use wheel spacers i don't want use wheel spacers

Well...look at strongmade or super atv.

 

[Bronco]

Well...look at strongmade or super atv.

thanks i'll look into them

 

[ToddACimer]

I don't think anybody makes a lift kit that makes the front and rear a-arms and track width the same width. If you want to run the same size tires on stock wheels or the same size aftermarket wheels with the same size tires, you'll need at least a spacer in the rear to even up the track width.

What kind of Bronco do you have?

 

[zmnypit]

sorry that won't work look at the note on the bottom of the page i have a 1000LE they want me to use wheel spacers i don't want use wheel spacers

Its the rear shocks that the problem. You can swap the rear shocks left/right side so the reservoir is facing forward and it clear the tires. I have a non LE3 with cfab 2.5" which is the same as the highlifter lift above and fox shocks and I had to swap my shocks around so they would clear the wheels/tires.

 

[CumminsPusher]

Its the rear shocks that the problem. You can swap the rear shocks left/right side so the reservoir is facing forward and it clear the tires. I have a non LE3 with cfab 2.5" which is the same as the highlifter lift above and fox shocks and I had to swap my shocks around so they would clear the wheels/tires.

Yep, they’ll go

 

[Bronco]

I don't think anybody makes a lift kit that makes the front and rear a-arms and track width the same width. If you want to run the same size tires on stock wheels or the same size aftermarket wheels with the same size tires, you'll need at least a spacer in the rear to even up the track width.

What kind of Bronco do you have?

Hi it's a 76 model going to try strong made one 2"