P1000 Opinions? 28" Tensors on MSA F2 Wheels

[edstoy]

I'm wanting to upgrade tires and wheels. I'm considering the 28 x 10 x 14 Tensor Regulators on MSA F2 Forged wheels on all 4 corners. These would be in the 4+3 offset. Would they scrub? Would i need a 1 inch spacer in the rear to get the rear out to match the front? Any opinions on this tire??????
Thanks for all of the help. This is a great forum

 

[Admin]

 

[rubicon05]

I have this tire in the same size and love them. No rubbing but I have 5+2 wheels

 

[Plumber32]

I've got the same tires on factory wheels. Love the tires!

 

[ghost]

I've got 5+2 and it adds a couple inches to the width of the machine with my Blackwater Evo tires. 4+3 would add 2 more.
I tried an extra 2inch width by using 2 inch spacers in the back and 1inch in the front. I like it better without the extra width for narrow trails.
Now I just use the 1 inch spacers in the back to even out the width.

 

[edstoy]

Well i ordered and they should be here next week.. will post pictures. will have a set of steel wheels for sell with tires. rears are about 75% and fronts about 50%.....

 

[edstoy]

OK, so I did it. I include some numbers (as I measured them) and pictures.

2016 Pioneer 1000 with stock steel wheels and 27" tires Inches
width of front 63
width of rear 63
height of tire front 26
height of tire rear 26
height to door sill 13
height of front differential 12.5
height of rear differential 12.5
weight of front wheel/tire 34 lbs
weight of rear wheel/tire 39 lbs

2016 Pioneer with 28x10x14 tires/4+3 wheels
width of front 66
width of rear 65
height of tire front 27.5
height of tire rear 27.5
height to door sill 14
height of front differential 13.38
height of rear differential 13.5
weight of front wheel/tire 48 lbs
weight of rear wheel/tire 48 lbs

 

[edstoy]

My pioneer was purchased last Thanksgiving and has 890 miles on it. i hope these are better tires for my type of riding....

 

[joeymt33]

Great info! Thank you


Sent from my iPad using Tapatalk