BOX1

P1000 P1K3LE Fun Haver build

Schmeg

Schmeg

Well-Known Member
Jan 9, 2020
187
394
63
Bangor Maine
Ownership

  1. 1000-5
Latest updates, this thing is way too hot in temps 80F and above. I took the Seizmik upper doors off. I left the inner door frames intact. This flows much more air. Still too hot. Mostly coming from the seat. A181ECC6 BA2A 4F0B 9657 D6C95B2A96EB
 
  • Like
Reactions: Isaiah and Mudwing
Schmeg

Schmeg

Well-Known Member
Jan 9, 2020
187
394
63
Bangor Maine
Ownership

  1. 1000-5
Time to install the DEI heat shield. It’s a quality piece. You’ll need to remove the seat bottom, and seat back and plastic transition panel. The foam in the middle of the panel needs to be removed, as well as all rubber from the Honda comfort kit except the seat belt rubber flaps. The metal stiffener can remain. This wasn’t mentioned in the instructions, but after trial and error, it works best to keep it in.BA61847B 4841 4CC1 A7DD 0847273B6E35
 
  • Like
Reactions: Isaiah and TripleB
Schmeg

Schmeg

Well-Known Member
Jan 9, 2020
187
394
63
Bangor Maine
Ownership

  1. 1000-5
Mold the two seat bottom panels to the buggy carefully. Take the time to get good alignment. This will pay off later. I used aluminum tape over most of the edges to keep them from separating. Start applying plastic rivets in the center on the seat bottom area and work out to the edges. B358B605 66DC 4EE2 A42D 15E2E9818870
 
  • Like
Reactions: TripleB
Schmeg

Schmeg

Well-Known Member
Jan 9, 2020
187
394
63
Bangor Maine
Ownership

  1. 1000-5
Now position the plastic transition o POP panel. Apply plastic rivets from the middle of the buggy, working your way left and right. Use a #2 Phillips to aid in aligning the rivet holes.14FB9B96 DC13 463A AFC4 9F456E2CD78BBD64E875 5A35 4CB4 844B 077D962BF57C
 
Last edited:
  • Like
Reactions: Isaiah and TripleB
Schmeg

Schmeg

Well-Known Member
Jan 9, 2020
187
394
63
Bangor Maine
Ownership

  1. 1000-5
This is a good time to check all electrical connections and intake boots for interference. Give a light tug on the fuel injector wires to ensure they aren’t loose. It’s an issue with P1000’s.10010ABA 4154 490D BE44 10F71B607307
 
  • Like
Reactions: Isaiah and TripleB
TripleB

TripleB

Well-Known Member
Lifetime Member
Aug 13, 2018
11,597
98,314
113
Caryville, Tennessee
Ownership

  1. 1000-3

  2. 1000-5
Best thing u can do is take the windshield off or get super art flip up windshield.
 
  • Like
Reactions: Isaiah
Schmeg

Schmeg

Well-Known Member
Jan 9, 2020
187
394
63
Bangor Maine
Ownership

  1. 1000-5
Super ATV flip doesn’t work with my Seizmik upper doors, or I would have chosen it. I can’t do away with the windshield, there are simply too many bugs in Maine to do so.
 
  • Like
Reactions: Isaiah and TripleB
ToddACimer

ToddACimer

Pioneer 1005-2
Lifetime Member
Oct 7, 2016
3,527
14,428
113
Oshkosh, Wi
Ownership

  1. 1000-5
I spent way too much effort on removing heat this winter and I'm 100% satisfied.

I added the Spal replacement radiator fan, it moves more air through the radiator. I had my header ceramic coated to improve cooling and keep mud from sticking to it. I have a 5" Spal underseat fan. I have the reflective sheild under the seat. I also have a Dynojet PV3 with the Dynojet fuel map. I modified the fan parameters to have the fan come on at coolant temp 180 instead of 220°F. I can ride with the windshield down and be happy about interior temp at 70°F
 
  • Like
Reactions: TripleB
L

LarryAmboy

Well-Known Member
May 14, 2017
898
1,990
93
Castalian Springs, Tennessee
Ownership

  1. 1000-5
I spent way too much effort on removing heat this winter and I'm 100% satisfied.

I added the Spal replacement radiator fan, it moves more air through the radiator. I had my header ceramic coated to improve cooling and keep mud from sticking to it. I have a 5" Spal underseat fan. I have the reflective sheild under the seat. I also have a Dynojet PV3 with the Dynojet fuel map. I modified the fan parameters to have the fan come on at coolant temp 180 instead of 220°F. I can ride with the windshield down and be happy about interior temp at 70°F

Will the PV3 allow shift point adjustments?

Also which of the 3 tunes they offer do you have?


Sent from my iPad using Tapatalk
 
ToddACimer

ToddACimer

Pioneer 1005-2
Lifetime Member
Oct 7, 2016
3,527
14,428
113
Oshkosh, Wi
Ownership

  1. 1000-5
Will the PV3 allow shift point adjustments?

Also which of the 3 tunes they offer do you have?


Sent from my iPad using Tapatalk

Pv3 base map has different shift points but you can change them too. I'm not sure what the difference is between the 3 Dynojet maps but only one works on my machine. I'm guessing the are for the base model (no paddle shifters), deluxe and LE.
 
Schmeg

Schmeg

Well-Known Member
Jan 9, 2020
187
394
63
Bangor Maine
Ownership

  1. 1000-5
Storage solutions installed today. Yeti Tundra 35 cooler with 4 corner chick tie down system. Rigid steel tool storage box bolted to the bed floor..D2B67392 4451 4023 AD83 1F0770544682853A4412 460D 4605 AFB3 D63B32DB0D43
 
  • Like
Reactions: TripleB
BOX2
box3

About us

  • Our community has been around for many years and pride ourselves on offering unbiased, critical discussion among people of all different backgrounds. We are working every day to make sure our community is one of the best.

User Menu

Buy us a beer!

  • Lots of time and money has gone into making sure the community is running the best software, best designs, and all the other bells and whistles. Care to buy us a beer? We'd really appreciate it!

    Beer Fund!

    Club Membership!