P1000 Pioneer wheel swap from talon

[MICHELLEHENDERSON]

Good Morning everyone. I’ve seen a lot of posts about the 28” tires on a pioneer so I’m just looking for a few clarifications I guess. If I swap my pioneer 27’s out with the 28’s off a talon will the wheels rub in the front without spacers? Also wondering about the ride, I’ve seen a couple guys post that the 28’s with the 15 inch rim have a terrible ride? Thanks so much.

 

[Admin]

 

[NTCPrezJB]

Good Morning everyone. I’ve seen a lot of posts about the 28” tires on a pioneer so I’m just looking for a few clarifications I guess. If I swap my pioneer 27’s out with the 28’s off a talon will the wheels rub in the front without spacers? Also wondering about the ride, I’ve seen a couple guys post that the 28’s with the 15 inch rim have a terrible ride? Thanks so much.

Extra sidewall is generally your friend for ride comfort off road.

I don't own either machine so I can't answer if they will fit without rub.

 

[JenElio]

Good Morning everyone. I’ve seen a lot of posts about the 28” tires on a pioneer so I’m just looking for a few clarifications I guess. If I swap my pioneer 27’s out with the 28’s off a talon will the wheels rub in the front without spacers? Also wondering about the ride, I’ve seen a couple guys post that the 28’s with the 15 inch rim have a terrible ride? Thanks so much.

It's been done recently, I dont remember who it was though. He swaped them out and said the ride comfort didnt bother cause they mainly rode hard pack I believe. As for the spacers im not sure. But im sure if you know the wheel offsets you can figure it out that way. I will say, I've read where people say they notice a big difference going from the stock steel 12" rims to the DLX 14" rims. So I would only gues the 15" is that much more of a rough ride.

 

[DJP1911]

Good Morning everyone. I’ve seen a lot of posts about the 28” tires on a pioneer so I’m just looking for a few clarifications I guess. If I swap my pioneer 27’s out with the 28’s off a talon will the wheels rub in the front without spacers? Also wondering about the ride, I’ve seen a couple guys post that the 28’s with the 15 inch rim have a terrible ride? Thanks so much.

I recently put Talon Wheels and tires on my 2016 P1000-5.
I went with 2 sets of rear tires off the Talon so that the tires are the same at the corners.
I did a 1.5” spacer on the rear.
The only running I have had was on the trail armor skid plate when turning hard either direction. But that was easily corrected by trimming alittle of the skid plate.

I have not noticed a big difference in the ride quality. I have been very pleased with the upgrade

.

 

[MICHELLEHENDERSON]

Ok great . Thanks for all the info!!!

 

[Kyle]

Did you lose any top speed when you put the talon wheels and tires on your pioneer?

 

[DJP1911]

Did you lose any top speed when you put the talon wheels and tires on your pioneer?

Sorry, but I don’t know. I don’t get the machine up to top speed very often.