P1000 Pitbull Tires

[Schmeg]

Anyone looking for a smoking deal on Pitbulls, go over to Pitbulls FB page and get the discount code for Valentine’s Day sale. 60% off sale. Just closed on a set of Growler BG’s for $389 shipped.

 

[Admin]

 

[JenElio]

Anyone looking for a smoking deal on Pitbulls, go over to Pitbulls FB page and get the discount code for Valentine’s Day sale. 60% off sale. Just closed on a set of Growler BG’s for $389 shipped.

Thats pretty good, I dont have FB do you know where else I can order from? Dont need tires right now but thats too good to pass up

 

[Pilotadam]

Loved my pitbulls on my Teryx running them on the Pioneer now but want to get a bigger size.

Sent from my SM-G960U using Tapatalk

 

[Schmeg]

Thats pretty good, I dont have FB do you know where else I can order from? Dont need tires right now but thats too good to pass up

The code is LOVEPB

 

[Schmeg]

I ordered 27x9x12 all four corners. I’m running 12x7 beadlocks. 11’s look enormous with the PB’s. Load rating is 639lbs on the 9’s. Does anyone see a problem with running this setup.

 

[JenElio]

I ordered 27x9x12 all four corners. I’m running 12x7 beadlocks. 11’s look enormous with the PB’s. Load rating is 639lbs on the 9’s. Does anyone see a problem with running this setup.

What offset? U might just have to get spacers to even it up a bit

 

[Jefferson87]

Just an FYI, the deal is killer, but you might have to wait quite a while to receive them.

I got some 42s from them a while back and it was 8 weeks iirc

 

[GlockMeister]

I ordered 27x9x12 all four corners. I’m running 12x7 beadlocks. 11’s look enormous with the PB’s. Load rating is 639lbs on the 9’s. Does anyone see a problem with running this setup.

Theyll be fine. I ran that size on mine for a while with no issues

 

[Schmeg]

Thanks. I will go as planned. I got a great deal on some close out STI HD headlocks for 75. Each at RMATV. 14x7 5/2 offset. I’ll probably run 1” 1.5” spacers fr/rear. I can’t imagine how you can fit an 11” Growler with a 9” rim width requirement on these rims.

 

[Schmeg]

Just an FYI, the deal is killer, but you might have to wait quite a while to receive them.

I got some 42s from them a while back and it was 8 weeks iirc

I’m not in a hurr. It’s -10 here in Maine right now. I’ll need them late spring.

 

[Jefferson87]

I’m not in a hurr. It’s -10 here in Maine right now. I’ll need them late spring.

Right, just figured I'd throw it out there. I'm super impatient when it comes to ordering parts 😂 so knowing a head of time helps.

 

[Adam490]

Anybody ever run the Growler A/T's? I imagine they are pretty heavy since they are steel belted

 

[BigOL3]

I ordered 27x9x12 all four corners. I’m running 12x7 beadlocks. 11’s look enormous with the PB’s. Load rating is 639lbs on the 9’s. Does anyone see a problem with running this setup.

I was checking the air pressure on my 28x10x12 Berzerkers today, and notice the loading rating was over 1100#!

 

[Schmeg]

Berserkers were on my short list. It was hard to pass up the deal on the Growlers.

 

[Cuoutdoors]

Berserkers were on my short list. It was hard to pass up the deal on the Growlers.

I got the berserkers because I couldn't get the growler in a 28. I had the growler on a quad and the grip was amazing! I have been real happy with the berserkers though also.

 

[Schmeg]

Did you lift your buggy to accommodate the 28”s? A-arms?

 

[BigOL3]

Berserkers were on my short list. It was hard to pass up the deal on the Growlers.

That price you got was too good to pass up.

 

[BigOL3]

Did you lift your buggy to accommodate the 28”s? A-arms?

With the 814s, I did not have to. Just trimmed the skid plate a little.

 

[Schmeg]

Here is a shameless plug for Pitbull. Ordered on the 14th. Got them today. Not bad at all, considering it was a Valentines sale. I made the mistake of not ordering more for all my quads. What a nice tire.

 

[Pilotadam]

I wish I would have pulled the trigger. Was in the budget right now. Hope they have a similar sale again

Sent from my SM-G960U using Tapatalk