P1000 Post your homemade mods!

[Kilo427]

Very nice

 

[Admin]

 

[Werk]

Very nice

Thanks
I figure simple and easy..
If it goes to shop bought extra hood they never knew it was there.

 

[Tot]

What do y'all think?

View attachment 15967 View attachment 15968

Looks good!

Sent from my SM-G900V using Tapatalk

 

[Werk]

Looks good!

Sent from my SM-G900V using Tapatalk

Thanks

 

[Boomboom907]

Needed to mount my winch so I threw this together with scrap that I had laying around my shop should work until I find and winch mount bumper

View attachment 9880 View attachment 9881

hey, im too lazy to read through the thread, and you might have gotten 30 responses about your mount.

i want this. can you elaborate on what you did to make it work?

 

[Gabriel727]

What do y'all think?

View attachment 15967 View attachment 15968

Nice mine snorkel i did it thru the cup holder. If you zoom in to that photo you cud see it

 

[sharp]

I painted my trailer hitch white to match my rig and got a beer coozie from busted knuckle that has magnets that will hold my beer on any type of metal it's pretty cool I would like to have one with honda sxs club on it!

 

[franzw]

Added front trailer hitch on front with honda winch setup, so I can move my trailers around easier in tight quarters.

View attachment 10125

Also picked up atv cargo carrier at Harbor freights, just the right size behind the rig and $40.00 price, listed at 300 lbs. Sits higher than it looks in picture deceiving.

 

[CarneyRacing]

My first real homemade mod:
P1000 - Pioneer 1000-6 mod

 

[amc019]

My first real homemade mod:
P1000 - Pioneer 1000-6 mod

pretty cool

 

[Someguy]

$30. and about 2hrs rear bumper

 

[Upstatefreedom]

View attachment 10178 I drilled hole in receiver and welded 5/16 nut and attached a bolt to keep hitch from rattling

Yup!! Great idea. I have done that to drop hitches as well. Like you, the rattling can be annoying. Lol.

 

[Upstatefreedom]

Uploaded a vid

That sound good!! What size holes did you drill and what diameter tip did you fab. ?

 

[BIGRACK]

That sound good!! What size holes did you drill and what diameter tip did you fab. ?

drilled 3/8 hole, treaded 1/2x 5/16 bolt in nut a little, put in hole tacked nut, let cool then ensured bolt threaded in and out.

 

[Upstatefreedom]

drilled 3/8 hole, treaded 1/2x 5/16 bolt in nut a little, put in hole tacked nut, let cool then ensured bolt threaded in and out.

drilled 3/8 hole, treaded 1/2x 5/16 bolt in nut a little, put in hole tacked nut, let cool then ensured bolt threaded in and out.

did a nice job on those welds. What size holes did you drill in the baffle in the muffler?

 

[Upstatefreedom]

I don't plan on deep water forging but I do want to try to protect the intake from ingesting water. I'm not big on adding a full snorkel kit either. So I'm trying something. I tied to seal up the intake cover at the bottom with some foam. I added a 45 pvc elbow. It would only face forward and still fit under the stock cover which I do have on. I am going to add frogzskin on the elbow and also thinking of putting some under the prefilter. Not sure if it will help but I'm investigating the idea. Lol.

 

[BIGRACK]

did a nice job on those welds. What size holes did you drill in the baffle in the muffler?

I didn't do any muffler mods, that is someone else. Sorry don't know on muffler I like them quiet.

 

[Someguy]

Iknow something got messed up. I made a rear bumper, Icouldn't get the pics to show, (Need to un zipfile, i couldn't for some reason)

 

[Someguy]

$30 and about 2hr rear bumper repost

 

[Someguy]

Mirror from what I had laying around that you could make for less than $10.