P1000 Ranch armor

[Dirtwerk]

Has anyone had issues with ranch armor i bought a roof for my 2021 1000 5 deluxe I ordered it in aluminum with the (extra foot long overhang ) and the laser cut rail in aluminum i had it delivered to a company i do work for it was damaged by fed ex the delivery driver made a note of it it take it to my my place to put it on the finish touch up by the factory was hideous it wasn't the extra foot as ordered and it's not wide enough i spoke with the nick the owner about the shipping damage he said he'd take care of it never heard anything emailed shout the other issues never heard back had the credit card reverse the charge then I here back he called my cell phone at 230 in the morning didn't answer he left a voice saying it was my fault the roof is not wide enough for my machine I was trying to resolve it with him but I haven't heard back just wondering if anyone else has had issues thanks

 

[Admin]

 

[Hondasxs]

Never heard of them.

Roof looks nice. But it's not my cup of tea. Especially this one.
Is this what you ordered?


Sent from my SM-G996U using Tapatalk

 

[Dirtwerk]

Yes almost 3k I have a large property in west Virginia with river front and a island on the Potomac river thought this would be a good accessory for hauling tubes coolers kayaks tree stands etc .

 

[Dirtwerk]

Nick said you can't get the extra foot on the Hondas and honda would've told them if they made the roll cage larger not sure why they would they are aftermarket not oem

 

[Hondasxs]

I could see that hauling tubes and stuff. Ok.
There has been no size or design changes to the cages.
2016 is basically the same cage as 2021.

 

[Dirtwerk]

So how wide is the cage at its widest point he said a 62 in wide roof should fit with room left over mine looks like it would have to be around 64 inches

 

[Hondasxs]

So how wide is the cage at its widest point he said a 62 in wide roof should fit with room left over mine looks like it would have to be around 64 inches

The machine at its widest point is 63.
That's most likely the tips of the front fenders.

 

[Dirtwerk]

Well my cage is at least 63 if not a little over that you can see in these pictures how sides are bulged out so he is correct with his
62 inch wide roof should I contact my dealer to see about a new cage

 

[Scoop]

Has anyone had issues with ranch armor i bought a roof for my 2021 1000 5 deluxe I ordered it in aluminum with the (extra foot long overhang ) and the laser cut rail in aluminum i had it delivered to a company i do work for it was damaged by fed ex the delivery driver made a note of it it take it to my my place to put it on the finish touch up by the factory was hideous it wasn't the extra foot as ordered and it's not wide enough i spoke with the nick the owner about the shipping damage he said he'd take care of it never heard anything emailed shout the other issues never heard back had the credit card reverse the charge then I here back he called my cell phone at 230 in the morning didn't answer he left a voice saying it was my fault the roof is not wide enough for my machine I was trying to resolve it with him but I haven't heard back just wondering if anyone else has had issues thanks

That, I say, that is the longest run-on sentence I've seen in a very long time! 😆

Hope you get your issue resolved.

 

[Joro43]

Any update I have a 2021 just bought in December brand new and am looking at the same roof?

 

[Dirtwerk]

The roof is 62 inches wide . My roll cage is 62 and 3/4 . So the roof didn't fit. Without distorting it .

 

[Dirtwerk]

I wish it would've been made to fit . The finish was also really blotchy.

 

[Remington]

Any update I have a 2021 just bought in December brand new and am looking at the same roof?

I wish it would've been made to fit . The finish was also really blotchy.

Why dont you guys just fabricate your own? That way its tailored fit for you and what u want. Alot cheaper at that. Alot of guys on here fabricate there own stuff. There was a guy a while back that did just that and made the same rack. turnd out nice. Search it up top. might take u a bit to find it and youll see what he did.
If you dont know how to weld? Now is a great time to learn!

 

[Dirtwerk]

Why dont you guys just fabricate your own? That way its tailored fit for you and what u want. Alot cheaper at that. Alot of guys on here fabricate there own stuff. There was a guy a while back that did just that and made the same rack. turnd out nice. Search it up top. might take u a bit to find it and youll see what he did.
If you dont know how to weld? Now is a great time to learn!

I wish I would've !