P1000 Regulators on hd4 limited edition wheels

[Hondoman]

Mounted up today. 28x10x14 tensor regulators on sti hd4 limited edition wheels. Used 1" satv spacers on the rear to even out the track. Stock height (for now).

 

[Admin]

 

[Smitty335]

Mounted up today. 28x10x14 tensor regulators on sti hd4 limited edition wheels. Used 1" satv spacers on the rear to even out the track. Stock height (for now).View attachment 70174

Tensor's are great tires, my brother runs them on his RZR, but I listened to some old grumpy men here and went with Black Waters, so far so good, but they wear in the rocks and they grip.

 

[elkguide]

Looking good.

How do they do in the mud, rocks and on the road?

 

[Hondoman]

Looking good.

How do they do in the mud, rocks and on the road?

Thanks. 0 miles on them so far. I'm guessing they are a jack of all trades, master of none. I'll report back after I can put some miles on them.

 

[JTW]

Thanks. 0 miles on them so far. I'm guessing they are a jack of all trades, master of none. I'll report back after I can put some miles on them.

You’re correct.. but it’s nice not having to swap tires or replace every year because you run a little blacktop here and there.

 

[Hondoman]

Highlifter lift.

 

[Hardwaterflyer]

Followed your lead on tires and rims with the rear spacers. Great handling improvement. No lift. Biggest test of this setup will be winter snow plowing and pulling the fish house around the lake this winter. Have Mattracks "E-Z" tracks to test out this winter too. This forum is awesome.

 

[Hondoman]

Followed your lead on tires and rims with the rear spacers. Great handling improvement. No lift. Biggest test of this setup will be winter snow plowing and pulling the fish house around the lake this winter. Have Mattracks "E-Z" tracks to test out this winter too. This forum is awesome.

Nice. Sometimes I wish I hadn't lifted mine due to the high center of gravity.

Got a pic of yours?

 

[ToddACimer]

How wide is your machine to the outside of the tires?

 

[Hondoman]

Mine is 65.5-66" as good as I can measure it.

 

[Hondoman]

As far as the report, I have about 300 miles on them now. I dont drive on asphalt much, but they were fine when I have. No snow or ice yet (texas), and they are ok in mud, not bad or great. The only time I've been stuck was when I was buried to the skid plate, noone else could make it through either. Everyone had to winch. They were pretty impressive on the rocks at barnwell mountain. I did get one cut on the sidewall that didn't go through and pinch flat. I had 10 psi in them since that's the recommended pressure for rocks (on the sidewall). Probably wouldn't have happened with more pressure.

 

[ToddACimer]

Mine is 65.5-66" as good as I can measure it.

Bummer. I would like to swap my 28x10s on to 5+2 wheels but I need to be under 65"

 

[mjn]

I've pretty much decided I'm going with the Regulators also.

 

[LarryAmboy]

I've pretty much decided I'm going with the Regulators also.

I love mine.

 

[Hardwaterflyer]

Will try to post up a pic. My rims are STI HD Beadlocks with the Tensor Regulators and the Ride-On Tire Balance and Sealant. Have a few miles on them now. Really like the stability in the ride. Everything purchased from RockyMountainATVMC.

 

[Diggertaker]

As heavy as they claim these tires are was there any noticeable lack of power? Also ive heard they are a true 28", no rubbing issues with stock height?

 

[Hardwaterflyer]

No rubbing issues with them. Since installation I have added rear Mud-Busters and the Honda overfenders on the front. The first time I was at my hunting property I went through a lot of mud and water and it threw up a lot of mud. These add ons pretty much solved that. They did ok in the mud. I really like how they ride. More stable less body roll. No noticeable loss of power--but I'm an "Easy-Rider" at my age. Love this Honda. My wife did not like the P700-2 but she thinks the P1000-5 Deluxe Camo is awesome. She enjoys driving it.

 

[Hardwaterflyer]

Finally a pic of the Regulators. 28x10x14 all around. 1" spacers on the rear. Running 12psi. Wheels are STI HD Beadlocks 14x7.

 

[Hardwaterflyer]

Needed the Honda front fender flares and the rear MUD-BUSTERS to help control the "slinging". They work great.

 

[Hardwaterflyer]

Just installed the KFI front receiver hitch for the LE bumper or the large OEM Honda Brushguard. Very stout well made.