P1000 Rust

[FloridaPath]

So I have had my p1k about 8 months, I have noticed frame rust on the sides under the bed to the point the paint is gone in one area and another where it is separating into like sheets. These are relatively small areas nothing really big. Just kinda surprised its only 8 months old and its already rusting up like this. Anyone else noticing this?

 

[Admin]

 

[Remington]

So I have had my p1k about 8 months, I have noticed frame rust on the sides under the bed to the point the paint is gone in one area and another where it is separating into like sheets. These are relatively small areas nothing really big. Just kinda surprised its only 8 months old and its already rusting up like this. Anyone else noticing this?

Need pics of this area in question to help you.

Also, did u try searching ur problem? Lots of threads on rust

 

[Jerryg]

JAH

 

[FloridaPath]

Need pics of this to help with ur question.

Also, did u try searching ur problem? Lots of threads on rust

Yea I see where people were talking about treating the rust. Was more just wondering if this is common. I will take some photos in a few and post them.

 

[bumperm]

You're not out there chasing mermaids in the surf, are you? Salt water'll do that! 🤔

 

[FloridaPath]

You're not out there chasing mermaids in the surf, are you? Salt water'll do that! 🤔

Lol no!

 

[DRZRon1]

all depends what u have that is corrosive in the bed, how often you are washing it down, etc……

need more info

Need pics to see that u r not asking for a friend

 

[FloridaPath]

all depends what u have that is corrosive in the bed, how often you are washing it down, etc……

need more info

Need pics to see that u r not asking for a friend

Nothing corrosive in bed. I usually wash it after we ride if there was mud.

 

[FloridaPath]

These are the areas where I have found the rust forming.

 

[Jerryg]

That really looks like s***. I wouldn't be happy with that.

I have a Honda lawntractor made in 1991 that has no rust on the frame.

 

[FloridaPath]

That really looks like s***. I wouldn't be happy with that.

I have a Honda lawntractor made in 1991 that has no rust on the frame.

I have a z400 from 2005 that isn't this bad. I just want it to last as long as that and I will be happy but looking at this I'm concerned. I might call the dealership tomorrow and ask since I got the extended warranty.

 

[Jerryg]

I have a z400 from 2005 that isn't this bad. I just want it to last as long as that and I will be happy but looking at this I'm concerned. I might call the dealership tomorrow and ask since I got the extended warranty.

Unfortunately, the problem lies in the materials being used. And only a blind person would be thrilled to see those s*** welds.

 

[RedorDead]

That looks like something that was never painted properly to begin with, or spent time in the surf!

 

[bumperm]

Get some Jasco Metal Etch (or at Home Depot, etc. any other dilute phosphoric acid). The phosphoric acid will convert the rust to ferrous phosphate and help stop further rusting. It will also serve as a good base for primer and paint. As an aside, phosphoric acid is also used on aluminum, prior to painting, so the paint will adhere properly.

 

[Jerryg]

Get some Jasco Metal Etch (or at Home Depot, etc. any other dilute phosphoric acid). The phosphoric acid will convert the rust to ferrous phosphate and help stop further rusting. It will also serve as a good base for primer and paint. As an aside, phosphoric acid is also used on aluminum, prior to painting, so the paint will adhere properly.

I have a better idea, sell that JAH and buy a decent machine.

 

[JenElio]

These are the areas where I have found the rust forming.

View attachment 371121 View attachment 371123 View attachment 371124 View attachment 371125 View attachment 371126

Yeah, that's a common Phuck up with these. I have the same issue with mine, I don't know where abouts in Florida you're at but around me it's hard to avoid water on the trails. I started spraying it down with WD40 and other lubes just to maintain it a bit.

 

[FloridaPath]

Yeah, that's a common Phuck up with these. I have the same issue with mine, I don't know where abouts in Florida you're at but around me it's hard to avoid water on the trails. I started spraying it down with WD40 and other lubes just to maintain it a bit.

I have the extended warranty and it says it covers the frame... I'm going to see how that works out... I dont know what exactly I want them to do... or what they will do.

 

[Jerryg]

You can try this, its a bit tougher than Fluid Film.

Surface Shield® Rust Protectant - B'laster Products

B’laster Surface Shield® is the longest lasting, Rust Protectant on the market. This unique formula is easy to apply and provides complete corrosion protection for all metal surfaces, equipment and moving parts. It’s the best defense in fighting rust. Features Extreme Moisture-Wicking Action...

blasterproducts.com

 

[DRZRon1]

yikes - possibly mud is corrosive if that’s a thing or just the damp mud sitting in there will eat it away combined with a crappy powder coat /paint from Honda - it can’t rust if it’s dry

seen this on rzrs as well - pulled skids and skids had 1” of damp mud - frame tubes would be flaking, corroding….

 

[FloridaPath]

yikes - possibly mud is corrosive if that’s a thing or just the damp mud sitting in there will eat it away combined with a crappy powder coat /paint from Honda - it can’t rust if it’s dry

seen this on rzrs as well - pulled skids and skids had 1” of damp mud - frame tubes would be flaking, corroding….

I wash it off pretty much after every ride