P1000 Stock vs after market wheels

[Staffordc92]

I know this has probably been beat to death and I’ll probably get more opinion answers. Just curious what people are using for wheels when lifting their pioneer? I own a 2021 Honda pioneer 5. Thinking of adding the c fab or super atv arched A arms with 30 inch tires. So my question is are most people using stock wheels with 30’s? If so are you using spacers? Or are you using aftermarket wheels? If so what offset? I believe Texas customs recommends 4+3 or 0 offset. What is the offset on stock wheels? I would like to use the stock wheels if possible. Thanks

 

[Admin]

 

[dweber23tr]

Most are moving up to 15" wheels because that is the most common size for 30 "+ tires.

 

[Scoop]

On my P1K5 Deluxe, I went with 15x7 5+2 System3 wheels with the RB3 Offroad Wide Track bundle spacers and 30x10-15 tires. This required the SATV a-arms and Fox QS3 shock upgrades. The only thing I would do different today is NOT buy the 10-ply Tusk Terrabite Aramid tires - too thick @ the bead and they leak on my beadlock wheels.

You'll see most of that stuff detailed in my build thread starting with this post:

P1000 - Scoop's 2021 P1K5 Deluxe Phantom Camo Build

Spent a couple hours swapping the OEM springs on some new Fox QS3 fronts (3P) and rears (5P) with Viper linear rate springs (F: 250#/R: 300#). Would like to find time tomorrow to get them swapped out on the bike, but it's a busy weekend.

hondasxs.com

 

[Staffordc92]

Thank you for the reply’s. Scoop, that is the exact setup I am looking for. Just curious, did you need the spacers or did you just want the extra width?

 

[Scoop]

Thank you for the reply’s. Scoop, that is the exact setup I am looking for. Just curious, did you need the spacers or did you just want the extra width?

Spacers were done to (re)align front and rear track.

 

[Robobrainiac]

I had a fun journey with my build. I am currently using C-Fab arms w/lift built in, fox shocks, vision 5+2 14" beadlocks, 30" Interco Sniper tires. I have spacers but cannot remember what size.

P1000m5 - The Robo Build

The Purchase: 07-16-20 Hello All! I don't think I have made an introduction yet. I have been on here for awhile now. My wife and I are from central MO. We recently purchased our first home on 20 acres almost a year ago. We have had a couple Honda 4 wheelers for maybe 4 years now and enjoyed the...

hondasxs.com