P1000 Super ATV a-arm guards?

Alaska350

Alaska350

Active Member
Feb 17, 2021
96
233
33
Anchorage, AK
Ownership

  1. Do not currently own
So I installed a new set super Atv a-arms last week. My aluminum a-arm guards would not fit so I tried to find some online but had zero luck. Is everyone with the high clearance a-arms just not running guards??
54B57ABB A712 4759 8DFD FC913008E010
 
Smitty335

Smitty335

Well-Known Member
Lifetime Member
Supporting Member
Oct 3, 2016
35,445
208,728
113
NWA Arkansas
Ownership

  1. 1000-3

  2. 1000-5
So I installed a new set super Atv a-arms last week. My aluminum a-arm guards would not fit so I tried to find some online but had zero luck. Is everyone with the high clearance a-arms just not running guards??View attachment 333610
BIG X on the A arm guards, pretty much worthless in my opinion.
 
ToddACimer

ToddACimer

Pioneer 1005-2
Lifetime Member
Oct 7, 2016
3,685
15,586
113
Oshkosh, Wi
Ownership

  1. 1000-5
SuperATV arms protect the boots with the arch. You'll likely be better off without them. With stock arms and a-arm guards, I ripped at least 5 boots (bent 7 a-arms too), in 3000 miles. With SuperATV arms front and rear I have not damaged a boot or a-arm in 2500 miles.
 
Remington

Remington

POIDH Enforcement Officer
Lifetime Member
Supporting Member
Jul 24, 2016
20,253
115,818
113
Michigan
Ownership

  1. 1000-5

  2. Talon X
Knuckledeep custom makes arm guards for the SATV arms. I have a set. Unlike above, I tore a few boots without them. Its a love hate relationship with or without them.
 
SuperATV

SuperATV

Well-Known Member
Vendor
Dec 5, 2013
1,372
9,599
113
Madison, IN
www.superatv.com
Knuckledeep custom makes arm guards for the SATV arms. I have a set. Unlike above, I tore a few boots without them. Its a love hate relationship with or without them.
That is an interesting company name! I'm a little scared to google them on my work computer....

No need for guards with our arms. Just beat the hell out of them. We'll replace them if you can bend one.
 
Remington

Remington

POIDH Enforcement Officer
Lifetime Member
Supporting Member
Jul 24, 2016
20,253
115,818
113
Michigan
Ownership

  1. 1000-5

  2. Talon X
That is an interesting company name! I'm a little scared to google them on my work computer....

No need for guards with our arms. Just beat the hell out of them. We'll replace them if you can bend one.
Hahahaha sounds good. Hes a forum member and fabricator
 
Smitty335

Smitty335

Well-Known Member
Lifetime Member
Supporting Member
Oct 3, 2016
35,445
208,728
113
NWA Arkansas
Ownership

  1. 1000-3

  2. 1000-5
So I installed a new set super Atv a-arms last week. My aluminum a-arm guards would not fit so I tried to find some online but had zero luck. Is everyone with the high clearance a-arms just not running guards??View attachment 333610
Yes and they don't hold mud.
 
advertisement

About us

  • Our community has been around for many years and pride ourselves on offering unbiased, critical discussion among people of all different backgrounds. We are working every day to make sure our community is one of the best.

User Menu

Buy us a beer!

  • Lots of time and money has gone into making sure the community is running the best software, best designs, and all the other bells and whistles. Care to buy us a beer? We'd really appreciate it!

    Beer Fund!

    Club Membership!