P1000 Switched power and Dash Light power

[TripleB]

DIY High Beam Trigger Wire Harness for Pioneer 1000 - All years - Takeover

Plug-N-Play wire harness for easy installation. Hookup a Small to Medium LED light bar with ease 2ft lead allows easy wiring to the accessory. An easy fix for the dim factor headlights by installing an extra high beam light bar. Plug-n-play install. No modification to the stock wires at all...

store.hondasxs.com

 

[Admin]

 

[TripleB]

Where is a convenient location/s to tap the brown wire from?
BTW, the pic doesn’t show any brown wires. I guess the brown one is hidden in the back of the cluster of wires shown by the arrow

DIY High Beam Trigger Wire Harness for Pioneer 1000 - All years - Takeover

Plug-N-Play wire harness for easy installation. Hookup a Small to Medium LED light bar with ease 2ft lead allows easy wiring to the accessory. An easy fix for the dim factor headlights by installing an extra high beam light bar. Plug-n-play install. No modification to the stock wires at all...

store.hondasxs.com

 

[Hondasxs]

Wire looks yellow in the pic.. but its brown.. Light brown... Tan... whichever.
* LE will be different.

 

[DocJoe]

That wire harness is super expensive, compared to tapping into the brown/tan wire for 4 cents, and the harness makes much confusion/messiness

 

[DocJoe]

DIY High Beam Trigger Wire Harness for Pioneer 1000 - All years - Takeover

Plug-N-Play wire harness for easy installation. Hookup a Small to Medium LED light bar with ease 2ft lead allows easy wiring to the accessory. An easy fix for the dim factor headlights by installing an extra high beam light bar. Plug-n-play install. No modification to the stock wires at all...

store.hondasxs.com

Also, this wire harness only turns on with high beams. The post and your recommended solution (tap the brown wire), was to turn on switch backlights with low beam headlights

 

[TripleB]

That wire harness is super expensive, compared to tapping into the brown/tan wire for 4 cents, and the harness makes much confusion/messiness

Lol tap away

 

[TripleB]

Also, this wire harness only turns on with high beams. The post and your recommended solution (tap the brown wire), was to turn on switch backlights with low beam headlights

Just ignore it. You don't have to explain anything to me. Lol

 

[DocJoe]

Just ignore it. You don't have to explain anything to me. Lol

???