BOX1

P1000m5 Used hard roof and middle roll bar for sale

tonyspioneer

tonyspioneer

New Member
Jun 2, 2021
13
22
3
Colorado Springs
Ownership

  1. 1000-5
Honda Pioneer 1000-5 OEM middle roll bar and hard roof for sale. Both are in great shape other than some scratches from tipping over(slow tip over not a roll over). Structurally sound and no bends or kinks. Tipped on the first drive and replaced them with new ones since. These only saw one outing. These retail for $680 (roof) and $730 (bar) on partzilla and more than that directly from Honda. Should fit any P1K5 from 2016-2021. Part numbers: 0SR85-HL4-501 and 71910-HL4-F00. Local pickup only. Make me an offer but don’t insult me. These are sitting beside my house so I’m ready to sell.

32D6D84F 50E5 4300 9B4A 3C14F1BC9542 A477FDD0 8092 4D50 9C58 7116B8FE444B A87F58D5 CFA8 4E8C 959C 30033288936E
 
  • Like
Reactions: Smitty335
tonyspioneer

tonyspioneer

New Member
Jun 2, 2021
13
22
3
Colorado Springs
Ownership

  1. 1000-5
Btw: only reason I replaced these parts is because the back left roll bar had to be replaced due to a kink and I figured I might as well make it look pretty if I was going to file an insurance claim. These are honestly just scratched. This is a great chance for some inexpensive parts.

D125825E 9AF7 4A40 9726 76FBA0EA6436
 
  • Like
Reactions: Smitty335
Remington

Remington

Sheriff Chief POIDH Enforcement Officer
Lifetime Member
Supporting Member
Jul 24, 2016
17,826
101,620
113
Michigan
Ownership

  1. 1000-5

  2. Talon X
Wow! Those roofs went up! 😬
 
  • Like
Reactions: Smitty335
solrus

solrus

Well-Known Member
Lifetime Member
Sep 2, 2015
1,629
2,508
113
Montana
Ownership

  1. 1000-5
If you have torch , just thread a chuck and pump air into tube while heating the tube, should pop up right out and then paint over. The roof you can fix with heat gun and any kind of metal flat scraper, that plastic melts and forms very well. I welded holes in my roof after similar roll over. Will save you good money. Otherwise from my experience, used not damaged roof goes for 400$, damaged in satisfactory condition 300$ plus , but shipping kills the deal vs buying new. Could not comment about the bar, due to geometry distortion.
 
  • Like
Reactions: Smitty335
tonyspioneer

tonyspioneer

New Member
Jun 2, 2021
13
22
3
Colorado Springs
Ownership

  1. 1000-5
If you have torch , just thread a chuck and pump air into tube while heating the tube, should pop up right out and then paint over. The roof you can fix with heat gun and any kind of metal flat scraper, that plastic melts and forms very well. I welded holes in my roof after similar roll over. Will save you good money. Otherwise from my experience, used not damaged roof goes for 400$, damaged in satisfactory condition 300$ plus , but shipping kills the deal vs buying new. Could not comment about the bar, due to geometry distortion.
You sound very familiar. You local to
 
  • Like
Reactions: Smitty335
tonyspioneer

tonyspioneer

New Member
Jun 2, 2021
13
22
3
Colorado Springs
Ownership

  1. 1000-5
Oops didnt finish my post and hit go by accident. I was gonna say, if your local, I’d love to see the process on the linked bar. I’m always looking to learn. Yeah, my unit is already pretty again. Just have these parts that need a new home. I’ve got them listed here and on Craigslist. I was thinking $300 for the roof and $500 for the bar. The middle bar really is just scratched. However, I think I’m gonna give the roof a shot like you said. Might be cool to have a spare that I can attach a basket to or something.
 
tonyspioneer

tonyspioneer

New Member
Jun 2, 2021
13
22
3
Colorado Springs
Ownership

  1. 1000-5
Oops didnt finish my post and hit go by accident. I was gonna say, if your local, I’d love to see the process on the linked bar. I’m always looking to learn. Yeah, my unit is already pretty again. Just have these parts that need a new home. I’ve got them listed here and on Craigslist. I was thinking $300 for the roof and $500 for the bar. The middle bar really is just scratched. However, I think I’m gonna give the roof a shot like you said. Might be cool to have a spare that I can attach a basket to or something.
*kinked. Words are hard 🥲
 
  • Like
Reactions: Smitty335
BOX2
box3

About us

  • Our community has been around for many years and pride ourselves on offering unbiased, critical discussion among people of all different backgrounds. We are working every day to make sure our community is one of the best.

User Menu

Buy us a beer!

  • Lots of time and money has gone into making sure the community is running the best software, best designs, and all the other bells and whistles. Care to buy us a beer? We'd really appreciate it!

    Beer Fund!

    Club Membership!