P500 Utv801 windshield

HUCK

HUCK

Well-Known Member
Lifetime Member
Jun 21, 2016
1,047
2,314
113
ARIZONA
Ownership

  1. 500

  2. Talon X
If you want a wiper get glass . If you don't SUPERATV flip is the best because you can vent it / open it / close it , all while underway . BUT you will lose your under hood storage unless you hinge the bottom peace .
 
P

pappyo

Well-Known Member
Dec 19, 2013
593
2,377
93
1sr. Welcome from central upstate N.Y
Many good people & information on the Honda forum AND they LIKE PICTURES

Red was the 1st color all other colors followed trying to catch some of the Glory & Honda hopes they sell.

U'll find this Crowd Eager to Help "U" <> Load C.C. <> Empty Checkbook <> Lower your Net Worth anyway they can.

The wife says the new 500 must have a windshield!
HEAR the "Wif" NOW or U WILL Later!

Do you have a Roof?
Roof & Winshield kinda go togeather pretty much Requires Rear Panel ( help with dust & exhaust back draft )
Consider:
GLASS or HARD COAT PLASTIC
Bottom folding vent for ( hood removal )

Have BOTH with wiper/ washer
P500 Honda Hardcoat Tilt
P520 801 Glass
PERFER </> 801 GLASS </> with Wiper/ Washer

Good Times To Be Had
Wif & U Will Enjoy the Toy ( IT's EASIER if U Hear the Wif the 1st. Time )


801 Glass <> with opening bottom Vent ( doesn't come with top Seal ) pool noodle or "Automotive door jam Seal" can work

Soft Plastic Winshield is a ""BIG NO"" </> WILL REGRET & Replace later
 
Last edited:
HUCK

HUCK

Well-Known Member
Lifetime Member
Jun 21, 2016
1,047
2,314
113
ARIZONA
Ownership

  1. 500

  2. Talon X
The website said it didn’t fit 2022? It says if fit up to 2021, is that correct?
I think that is true . The 2022 and the 520s have an additional ROPs brace near the top . If you have any or a dealer near by with both or the older version it will be easy to tell for sure .
 
Pemby

Pemby

Member
Hey Welcome,

I went with the UTV 801 glass, installed a 12volt wiper from a 2006 Ford Escape rear wiper.
The bottom flips up for venting also provides the needed clearance to open the hood. Installed a section of waterline foam insulation to fill the gap at the top of the windshield.
I also tossed between the flip up super atv , the turning point for me was glass is much harder to scratch versus poly windshield I’m very happy with the quality of the 801.


93CC1139 1580 4ED7 8783 AE0C5C46EEF3 411A644B BA71 4E4D 95A5 4C1F6C406F4F 4346DAE3 B925 4884 91A8 44A89E44B885
 
HUCK

HUCK

Well-Known Member
Lifetime Member
Jun 21, 2016
1,047
2,314
113
ARIZONA
Ownership

  1. 500

  2. Talon X
Hey Welcome,

I went with the UTV 801 glass, installed a 12volt wiper from a 2006 Ford Escape rear wiper.
The bottom flips up for venting also provides the needed clearance to open the hood. Installed a section of waterline foam insulation to fill the gap at the top of the windshield.
I also tossed between the flip up super atv , the turning point for me was glass is much harder to scratch versus poly windshield I’m very happy with the quality of the 801.


View attachment 368804 View attachment 368805 View attachment 368806
The key is YOU LIKE IT . hope the wife does .. LOL /, Looks great
 
The Green Goat

The Green Goat

LGBTQ Compliance Officer -Lotta gays in this place
Lifetime Member
Supporting Member
Sep 7, 2020
1,744
12,342
113
Ohio
Ownership

  1. 520
UTV801 windshield here. I like it so far. I installed it before the last Takeover and it's been great. I figured I'd get hot in the summer but the lower vent seems to be adequate for airflow. The wiper is handy as well.
 
W

wtmcminn

Active Member
Aug 10, 2022
23
159
28
Texas
Ownership

  1. 520
Hey Welcome,

I went with the UTV 801 glass, installed a 12volt wiper from a 2006 Ford Escape rear wiper.
The bottom flips up for venting also provides the needed clearance to open the hood. Installed a section of waterline foam insulation to fill the gap at the top of the windshield.
I also tossed between the flip up super atv , the turning point for me was glass is much harder to scratch versus poly windshield I’m very happy with the quality of the 801.


View attachment 368804 View attachment 368805 View attachment 368806
a related question, that light bar. is it simply secured to the plastic roof? or does that bracket go through to a metal bar? could you send me or post some inside pics of that set up? roof/windshield look great...wish I had a wiper.
 
advertisement

About us

  • Our community has been around for many years and pride ourselves on offering unbiased, critical discussion among people of all different backgrounds. We are working every day to make sure our community is one of the best.

User Menu

Buy us a beer!

  • Lots of time and money has gone into making sure the community is running the best software, best designs, and all the other bells and whistles. Care to buy us a beer? We'd really appreciate it!

    Beer Fund!

    Club Membership!