P500 What did you do to/with your Pioneer 500 today?

[ladoredb]

Since we had ice on the Bay, I was forced against my will to catch some Perch.

 

[Admin]

 

[futzin]

 

[Smitty335]

View attachment 459199

Snow blower?

 

[KyGal83]

View attachment 459199

Look at it… with its lil’ baby tires. So precious.

 

[futzin]

Look at it… with its lil’ baby tires. So precious.

Gotta squeeze it into the basement for an oil change and to try to adjust the front Mudbusters outboard as much as possible.

 

[futzin]

View attachment 459199

Forgot to put the wipers down before driving into basement, snapped 'em off on the low overhang. What a moe-ron! 😑

But got the oil changed, reinstalled the windshield side gaskets, and moved the front mud flaps out to the max (that took longest). Gained about an inch, we'll see how much it helps.

 

[DogSledder]

I did nothing with it other than let it set in the barn and collect dust. We finally had enough snow that I could run dogs with the sled and not the P500

 

[trigger]

Got a break between snow storms so plowed with it... again.

 

[DogSledder]

Baldwin and Mancelona, where I run dogs in Michigan have good snow now. Would have been to the UP200 this weekend if I wouldn't have had health problems. Was in the hospital 2 weeks ago.

 

[Fatsquatch]

Baldwin and Mancelona, where I run dogs in Michigan have good snow now. Would have been to the UP200 this weekend if I wouldn't have had health problems. Was in the hospital 2 weeks ago.

🙏🏻🙏🏻🙏🏻hopefully they got it figured out and things are going better again

 

[DaveinWV]

Picked up branches that broke off our trees and used our 520 to haul them off. Then my wife and I took a ride since the weather was nice.

 

[scottn57]

Today I finally got the sap wagon I’ve been working on back to the Sugarbush- We just need to finish tapping all the trees before I can fully test it, but it seems to pull OK. On a downside, I also found a tear in my Camso track..

 

[Fatsquatch]

Today I finally got the sap wagon I’ve been working on back to the Sugarbush- We just need to finish tapping all the trees before I can fully test it, but it seems to pull OK. On a downside, I also found a tear in my Camso track..
View attachment 461103

View attachment 461104View attachment 461105

How much is a new track? I imagine it’s more than a tire but 🤷🏻‍♂️. Is that a repairable issue?

(Track ignorant here obviously)

 

[906UP]

Today I finally got the sap wagon I’ve been working on back to the Sugarbush- We just need to finish tapping all the trees before I can fully test it, but it seems to pull OK. On a downside, I also found a tear in my Camso track..
View attachment 461103

View attachment 461104View attachment 461105

Take a sawzall with a fine tooth blade and cut it the rest of the way towards the outside of the track, making a large radius, that should keep it from tearing more or moving inboard. My RF track has a few rips on the edge but it's been that way for about 3 years and hasn't gotten worse

How much is a new track? I imagine it’s more than a tire but 🤷🏻‍♂️. Is that a repairable issue?

(Track ignorant here obviously)

Camso is damn proud of their parts, last I looked a track was around 5 Benjamins

 

[Fatsquatch]

Take a sawzall with a fine tooth blade and cut it the rest of the way towards the outside of the track, making a large radius, that should keep it from tearing more or moving inboard. My RF track has a few rips on the edge but it's been that way for about 3 years and hasn't gotten worse


Camso is damn proud of their parts, last I looked a track was around 5 Benjamins

🤯 yikes!

 

[Mudder]

Today I finally got the sap wagon I’ve been working on back to the Sugarbush- We just need to finish tapping all the trees before I can fully test it, but it seems to pull OK. On a downside, I also found a tear in my Camso track..
View attachment 461103

View attachment 461104View attachment 461105

Definitely beyond a Shoo-Goo fix. Nice rig set up, best of luck.

 

[scottn57]

Take a sawzall with a fine tooth blade and cut it the rest of the way towards the outside of the track, making a large radius, that should keep it from tearing more or moving inboard. My RF track has a few rips on the edge but it's been that way for about 3 years and hasn't gotten worse


Camso is damn proud of their parts, last I looked a track was around 5 Benjamins

That’s basically what we did- I’ll have to finish it better before the next outing- thanks. The tear was facing the direction of the track spin which would have been bad.

 

[trigger]

Cheese and Rice! Oil filter and 3 qts of Honda full synthetic... $57! SOB's...

 

[Fatsquatch]

Cheese and Rice! Oil filter and 3 qts of Honda full synthetic... $57! SOB's...

Hopefully you don’t spill any.

 

[Smitty335]

Cheese and Rice! Oil filter and 3 qts of Honda full synthetic... $57! SOB's...

Go buy a air filter for a P1, $ 60.00 +