P700 What did you do to/with your Pioneer 700 today?

[Mudwing]

Looking good. After I messed around under mine today I had already decided that skid plates would be in my future. Couldn't believe plastic is under this thing. Plastic rattled a bunch when tapped on too.

Did you have to do any mods or was it a perfect fit?

The skids fit perfect. You have to drill into the side bars with self tappers but everything else uses stock mounting holes. They are UHMW. It’s better than steel. Under the 7hundo you have to slide the door underneath to get to the drain plug. My stock steel skid was bent into the engine and I couldn’t push that door over. 😉
The shiny spot on the skid is the engine polishing it.

 

[Admin]

 

[DG Rider]

Today I added to my collection of sway bars...

 

[Booey424]

I put a light bar on and camo Honda stickers on front and back
Any suggestions on hiding the rusty muffler?

 

[livefromthetree]

Y'all remember I'm not mechanically inclined at all, but I added a rear work light today. Put a front bar on a few months back and was proud enuf of myself that I tackled the rear light too 🤣.

Took me friggin forever! Probably should have given someone $20 while I drank beer and cheered them on, but it's done.

Haven't aimed it yet, but it will be perfect for backing up, loading deer and about anything else needed.

 

[Slackjaw]

Is that the kit from the members store?

 

[livefromthetree]

Is that the kit from the members store?

It is although I didn't tie it to my reverse. I put it on a rocker.

 

[livefromthetree]

Is that the kit from the members store?

Also used this harness. The light kit came with enough wire to do what I wanted, but I'm not bright enough to tie in a relay, fuse and rocker so I added this and it worked great.

https://www.amazon.com/dp/B00O72R7Z8?tag=sxsweb24-20

 

[DG Rider]

I've spoke on cam timing changes on the 700 before. I was actually unaware of this until someone posted a FSM page and caught the edge of this page.

I haven't done any hot rodding theory in a while, but i believe advancing the cam timing helps bottom end? Someone refresh my memory?
If so, was this Honda trying to address the power issues at high elevations, or was it purely emissions?

 

[DBD]

Nessie got some eyes today! Now she can see where to go when I can't. 🤣

 

[DG Rider]

After sitting around for the 1st 2 months I owned it...

 

[Popeye212]

Hello all noob here. Today I mounted a Kolpin soft case gun bag and a front receiver hitch. Looking at lights for certain the first one will be a dome or interior light.

 

[ineedmud]

Added the mudbusters.

 

[DG Rider]

New shoes for the 7 hundo...

Tusk Trilobite, 26x10 rear, 26x9 fronts. I didn't want to "over tire" this thing.

Heights at 9PSI was 26 3/8" rear, and about 26 1/4 front with just the weight of the tire (matching my previous experience with these), so despite some claims, they run pretty true to size. I'm probably going to run about 7psi from what I was seeing during the mounting. This is my second set of these, the previous being on the 500. They did pretty well on it.

1283 miles.

 

[Slackjaw]

New shoes for the 7 hundo...

View attachment 249730View attachment 249731View attachment 249732

Tusk Trilobite, 26x10 rear, 26x9 fronts. I didn't want to "over tire" this thing.

Heights at 9PSI was 26 3/8" rear, and about 26 1/4 front with just the weight of the tire (matching my previous experience with these), so despite some claims, they run pretty true to size. I'm probably going to run about 7psi from what I was seeing during the mounting. This is my second set of these, the previous being on the 500. They did pretty well on it.

1283 miles.

Those don't look like terrabytes to me.
Wrong pic?

 

[DG Rider]

Those don't look like terrabytes to me.
Wrong pic?

That's because they aren't terrabytes. TRILOBITES.

 

[Rmflyer1]

I've been looking to add an aux battery on my 700. let me know where you install the battery. I have set up the isolator, second fuse panel, Side mirrors with bright flood and spot lights built in, radio with rear speakers mounted on the roll bar, rear light, rocker switch plate. having a blast with my first sxs.

I built a battery rack and installed it under the drivers Seat, mounted isolator under the Hood.

 

[DG Rider]

Busy week:
Monday-tires you saw above.

Tuesday-oil change and valve check. "Fixed" seatbelt warning limiter. I've been running Supertech ATV 10-30 synthetic since new, but the supply is inconsistent. Going to go to T6 5-40 again. Be curious to note if I can tell any differences.

Last night I packed cooler and buffed the 1/2 shield some.

 

[Backwoods]

I washed mine today.

 

[WagginTail]

Worked on my cargo basket I'm building. Taking the rincon out for a ride tomorrow.

 

[JimmyA]

Left it parked under the carport!