Wheel jacks

Jmaxx1502

Jmaxx1502

Active Member
Feb 7, 2021
115
151
43
Cocoa beach
Ownership

  1. Talon X4
I have the Same Jack on my 2021 talon x4. It is pretty trick. I have only tested it in my drive way and works as described. I have 2 issues. 1) The rear shock tabs bent a little after first try. Seems a thicker shock tab would be better. 2) The Steel rear shock mount that the tabs bolt to angle the jack toward the center not straight ahead. Seems that might have been what bent the tabs. I am waiting on Todd from Tuff Trail gear to get back with me and see what we can figure out.

86FB14E3 D5DC 4367 A6CF 4B975F80A3D7 D94E249F FFDB 413C B7A4 5B1AE6F59894 5C53C6A1 E229 4E6C 9C25 CBFA27C39397 12719C4A CD08 4601 85A9 29AF0AA6C0FC
 
F

Fyathyrio

Well-Known Member
Sep 24, 2019
245
675
93
Utah
Ownership

  1. Talon R
Well, it's been almost a year since getting this jack and I haven't had to use it out on the trail yet, so far any tire leaks have been handled by the FlatOut tire sealant. I just learned about an adapter they've released that turns the jack attachment point into a tie down point, too. Looks pretty slick, and attaching there takes the springs and bouncing out of the equation.

For my trailer, these will work fine on the front, so I did order a pair. I'm not sure they will work on the back without the straps rubbing the arms or tires, I'll have to try once I get them.

S104878968225085722 p17 i13 w2000
 
  • Like
Reactions: Smitty335 and CID
F

Fyathyrio

Well-Known Member
Sep 24, 2019
245
675
93
Utah
Ownership

  1. Talon R
So, this picture (below) on the Tuff Trail Jack site caught my eye. To me that appears to be a lot of potential force on a single 1/4" pin in a straight pull shear situation; particularly when factoring in the loads from trailering. I emailed the manf. a week ago and asked if they had any strength specs on the pin, or testing, or pretty much anything since I could not find any data online for a 1/4" hitch pin other than it may be stainless, or it may be chromed. They have declined to get back to me, a lapse I find concerning.

Maybe this isn't the elegant solution it first appeared? Any of you folks happen to be a mechanical engineer that can opine on this better than I?

S104878968225085722 p17 i2 w2560
 
  • Like
Reactions: Smitty335
Huntndogs

Huntndogs

Well-Known Member
Supporting Member
Mar 23, 2021
203
1,312
93
San Diego, Ca.
Ownership

  1. Talon R
Fyathyrio, did they ever get back to you regarding the rear mounts? I am still considering this jack. Anyone else have experience with it?
 
  • Like
Reactions: Smitty335

About us

  • Our community has been around for many years and pride ourselves on offering unbiased, critical discussion among people of all different backgrounds. We are working every day to make sure our community is one of the best.

User Menu

Buy us a beer!

  • Lots of time and money has gone into making sure the community is running the best software, best designs, and all the other bells and whistles. Care to buy us a beer? We'd really appreciate it!

    Beer Fund!

    Club Membership!